The Country Shed 

Scopes, Mounts,& Accessories Tactical Shotgun General Accessories Heated Gloves & Socks SAKO Tikka Beretta
Holsters Rifle Bases

Gun Accessories

Handgun / Pistol

DVD's and CD's

Rifle Stocks High Capacity Magazines Tools Disassembly Manuals Sling Shots
Flashlights & Lasers Shotgun Stocks Survival Gear

NFL & College Flags

Slings & Swivel Sets
Novelty And Gift Items Ammo Can Magnets & Stickers Dutch Ovens & Accessories Special Closeouts

Home Contact Us Ordering Shipping & Policies Links What's New & Hot Gift Ideas Join Email List Special Closeouts

 

Winchester Bases

EGW, Evolution Gun Works, PRI, Winchester Bases, Scope Mounts, Optics Mounting, 1300, 52, 52 Target, Model 70, Model 70 STD, LA, Pre 64, 70 WSM, 70 WSSM, 88, 100, Winchester FN, Winchester STD,0 MOA, 20 MOA, 30 MOA, Neg 20 MOA, Silver, Black, Aluminum, HD, Heavy Duty, Picatinny, Drilled, Undrilled, long Action, LA, Short Action, SA, 

EGW Winchester 1300 Picatinny Scope Rail Mount

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided
Center Spread: 2.49"
Overall Length: 6.276"

When installing, tighten rear screw last.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories.

The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average.

Also, in many cases, it will not obstruct usage of factory iron sights.

EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

Add EGW's Practical or HD Scope Rings to make it a complete overhaul!

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

Made In The USA

Item Number Price  
42500 $40.00

 

EGW Winchester 52 Picatinny Rail Scope Mount 0 MOA UNDRILLED

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided
Overall Length: 5.882"

Our Winchester 52 mount is made specific to the gun, although it does fit on a Kimber 82C, 82G, H&R 12, Winchester 75, as well as an Anschutz 64 and a Remington 37.

If your Winchester has a TAPERED BARREL (very front of the barrel measures less than .750 , you will need a negative 20 MOA. The tapered barrel automatically gives you a 20 MOA, the negative will bring you back to 0 MOA. You will need to remove the barrel blocks in order to install this mount. The mount will then screw into the barrel (screws are provided).

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. 

The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. 

Also, in many cases, it will not obstruct usage of factory iron sights. 

EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike. 

Add EGW's Practical or HD Scope Rings to make it a complete overhaul! 

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings. 

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

Made In The USA

Item Number Price  
42703 $40.00

 

EGW Winchester 52 Target (fits Kimber 82C, 82G, Anschutz 64, Rem 37) Picatinny Rail Scope Mount 0 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided
Overall Length: 5.882"

Our Winchester 52 mount is made specific to the gun, although it does fit on a Kimber 82C, 82G, H&R 12, Winchester 75, as well as an Anschutz 64 and a Remington 37. 

If your Winchester has a TAPERED BARREL (very front of the barrel measures less than .750 , you will need a negative 20 MOA. The tapered barrel automatically gives you a 20 MOA, the negative will bring you back to 0 MOA.  You will need to remove the barrel blocks in order to install this mount. The mount will then screw into the barrel (screws are provided).

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories.

The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average.

Also, in many cases, it will not obstruct usage of factory iron sights.

EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

Add EGW's Practical or HD Scope Rings to make it a complete overhaul!

Available in matte black. Custom silver anodizing is available upon request, at an additional charge of $15 (there is also a 3 month lead time associated with silver anodizing. Please give us a call if you'd like to place a custom order).

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

Made In The USA

Item Number Price  
42700 $40.00

 

EGW Winchester 52 Target (fits Kimber 82C, 82G, Anschutz 64, Rem 37) Picatinny Rail Scope Mount 20 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided
Overall Length: 5.882"

Our Winchester 52 mount is made specific to the gun, although it does fit on a Kimber 82C, 82G, H&R 12, Winchester 75, as well as an Anschutz 64 and a Remington 37.

If your Winchester has a TAPERED BARREL (very front of the barrel measures less than .750 , you will need a negative 20 MOA. The tapered barrel automatically gives you a 20 MOA, the negative will bring you back to 0 MOA. You will need to remove the barrel blocks in order to install this mount. The mount will then screw into the barrel (screws are provided).

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. 

The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. 

Also, in many cases, it will not obstruct usage of factory iron sights. 

EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike. 

Add EGW's Practical or HD Scope Rings to make it a complete overhaul! 

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings. 

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

Made In The USA

Item Number Price  
42702 $40.00

 

EGW Winchester 52 Target (fits Kimber 82C, 82G, Anschutz 64, Rem 37) Picatinny Rail Scope Mounts Neg 20 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided
Overall Length: 5.882"

Our Winchester 52 mount is made specific to the gun, although it does fit on a Kimber 82C, 82G, H&R 12, Winchester 75, as well as an Anschutz 64 and a Remington 37. This mount is available in 0, 20 and Negative 20 MOA.

If your Winchester has a TAPERED BARREL (very front of the barrel measures less than .750? , you will need a negative 20 MOA. The tapered barrel automatically gives you a 20 MOA, the negative will bring you back to 0 MOA.  You will need to remove the barrel blocks in order to install this mount. The mount will then screw into the barrel (screws are provided).

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. 

The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. 

Also, in many cases, it will not obstruct usage of factory iron sights. 

EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike. 

Add EGW's Practical or HD Scope Rings to make it a complete overhaul! 

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings. 

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

Made In The USA

Item Number Price  
42701 $40.00

 

EGW Winchester 70 Picatinny Scope Rail Mount HH .325 Middle 0 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided
Center Spread: 4.343"
Overall Length: 7.064"


Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. 

The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. 

Also, in many cases, it will not obstruct usage of factory iron sights. 

EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike. 

Add EGW's Practical or HD Scope Rings to make it a complete overhaul! 

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings. 

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

Made In The USA

Item Number Price  
42400 $40.00

 

EGW Winchester 70 Picatinny Scope Rail Mount HH .375 Middle 0 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided
Center Spread: 4.293"
Overall Length: 7.064"

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. 

The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. 

Also, in many cases, it will not obstruct usage of factory iron sights. 

EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike. 

Add EGW's Practical or HD Scope Rings to make it a complete overhaul! 

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings. 

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

Made In The USA

Item Number Price  
42401 $40.00

 

EGW Winchester 70 Picatinny Scope Rail Mount HH .437 Middle 0 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided
Center Spread: 4.231"
Overall Length: 7.064"

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. 

The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. 

Also, in many cases, it will not obstruct usage of factory iron sights. 

EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike. 

Add EGW's Practical or HD Scope Rings to make it a complete overhaul! 

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings. 

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

Made In The USA

 

Item Number Price  
42402 $40.00

 

EGW Winchester 70 Short Action Picatinny Rail Scope Mount 0 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided
Center Spread: 3.259"
Overall Length: 6.276"

*The Winchester Coyote edition chambered in .243 will require our WSM mount, NOT this mount*

The middle spread is the distance between the two middle holes, center to center, on your receiver. The middle spreads on our Winchester 70 mounts are as follows:

Winchester 70 Short Action: 3.259"
Winchester 70 Long Action: 3.805"
Winchester 70 WSM: 3.514"
Winchester 70 WSSM: 3.225"

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. 

The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. 

Also, in many cases, it will not obstruct usage of factory iron sights. 

EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike. 

Add EGW's Practical or HD Scope Rings to make it a complete overhaul! 

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings. 

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

Made In The USA

Item Number Price  
42000 $40.00

 

EGW Winchester 70 Short Action Picatinny Rail Scope Mount 20 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided
Center Spread: 3.259"
Overall Length: 6.276"

*The Winchester Coyote edition chambered in .243 will require our WSM mountNOT this mount*

The middle spread is the distance between the two middle holes, center to center, on your receiver. The middle spreads on our Winchester 70 mounts are as follows:

Winchester 70 Short Action: 3.259"
Winchester 70 Long Action: 3.805"
Winchester 70 WSM: 3.514"
Winchester 70 WSSM: 3.225"

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. 

The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. 

Also, in many cases, it will not obstruct usage of factory iron sights. 

EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike. 

Add EGW's Practical or HD Scope Rings to make it a complete overhaul! 

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings. 

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

Made In The USA

Item Number Price  
42002 $40.00

 

EGW Winchester 70 STD/LA Picatinny Rail Scope Mounts (Pre 64) 0 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided
Center Spread: 3.805"
Overall Length: 7.064"


*The Winchester Coyote edition chambered in .243 will require our WSM mount, NOT this mount*

The middle spread is the distance between the two middle holes, center to center, on your receiver. The middle spreads on our Winchester 70 mounts are as follows:

Winchester 70 Short Action: 3.259"
Winchester 70 Long Action: 3.805"
Winchester 70 WSM: 3.514"
Winchester 70 WSSM: 3.225"

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. 

The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. 

Also, in many cases, it will not obstruct usage of factory iron sights. 

EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike. 

Add EGW's Practical or HD Scope Rings to make it a complete overhaul! 

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings. 

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

Made In The USA

Item Number Price  
42100 $40.00

 

EGW Winchester 70 STD/LA Picatinny Rail Scope Mounts (Pre 64) 20 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided
Center Spread: 3.805"
Overall Length: 7.064"

*The Winchester Coyote edition chambered in .243 will require our WSM mount, NOT this mount* 

The middle spread is the distance between the two middle holes, center to center, on your receiver. The middle spreads on our Winchester 70 mounts are as follows:

Winchester 70 Short Action: 3.259"
Winchester 70 Long Action: 3.805"
Winchester 70 WSM: 3.514"
Winchester 70 WSSM: 3.225"

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. 

The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. 

Also, in many cases, it will not obstruct usage of factory iron sights. 

EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike. 

Add EGW's Practical or HD Scope Rings to make it a complete overhaul! 

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings. 

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

Made In The USA

Item Number Price  
42102 $40.00

 

EGW Winchester 70 WSM Picatinny Rail Scope Mount 0 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided
Center Spread: 3.514"
Overall Length: 6.670"

*The Winchester Coyote edition chambered in .243 will require our WSM mount

The middle spread is the distance between the two middle holes, center to center, on your receiver. The middle spreads on our Winchester 70 mounts are as follows:

Winchester 70 Short Action: 3.259"
Winchester 70 Long Action: 3.805"
Winchester 70 WSM: 3.514"
Winchester 70 WSSM: 3.225"

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. 

The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. 

Also, in many cases, it will not obstruct usage of factory iron sights. 

EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike. 

Add EGW's Practical or HD Scope Rings to make it a complete overhaul! 

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings. 

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

Made In The USA

Item Number Price  
42200 $40.00

 

EGW Winchester 70 WSM Picatinny Rail Scope Mount 20 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided
Center Spread: 3.514"
Overall Length: 6.670"

*The Winchester Coyote edition chambered in .243 will require our WSM mount

The middle spread is the distance between the two middle holes, center to center, on your receiver. The middle spreads on our Winchester 70 mounts are as follows:

Winchester 70 Short Action: 3.259"
Winchester 70 Long Action: 3.805"
Winchester 70 WSM: 3.514"
Winchester 70 WSSM: 3.225"

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. 

The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. 

Also, in many cases, it will not obstruct usage of factory iron sights. 

EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike. 

Add EGW's Practical or HD Scope Rings to make it a complete overhaul! 

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings. 

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

Made In The USA

Item Number Price  
42202 $40.00

 

EGW Winchester 70 WSSM Picatinny Rail Scope Mount 0 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided
Center Spread: 3.225"
Overall Length: 5.882"


*The Winchester Coyote edition chambered in .243 will require our WSM mount, NOT this mount*

The middle spread is the distance between the two middle holes, center to center, on your receiver. The middle spreads on our Winchester 70 mounts are as follows:

Winchester 70 Short Action: 3.259"
Winchester 70 Long Action: 3.805"
Winchester 70 WSM: 3.514"
Winchester 70 WSSM: 3.225"

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. 

The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. 

Also, in many cases, it will not obstruct usage of factory iron sights. 

EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike. 

Add EGW's Practical or HD Scope Rings to make it a complete overhaul! 

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings. 

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

Made In The USA

Item Number Price  
42300 $40.00

 

EGW Winchester 70 WSSM Picatinny Rail Scope Mount 20 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided
Center Spread: 3.225"
Overall Length: 5.882"

*The Winchester Coyote edition chambered in .243 will require our WSM mount, NOT this mount*

The middle spread is the distance between the two middle holes, center to center, on your receiver. The middle spreads on our Winchester 70 mounts are as follows:

Winchester 70 Short Action: 3.259"
Winchester 70 Long Action: 3.805"
Winchester 70 WSM: 3.514"
Winchester 70 WSSM: 3.225"

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. 

The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. 

Also, in many cases, it will not obstruct usage of factory iron sights. 

EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike. 

Add EGW's Practical or HD Scope Rings to make it a complete overhaul! 

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings. 

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

Made In The USA

Item Number Price  
42302 $40.00

 

EGW Winchester 88, 100 Picatinny Rail Scope Mount 0 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided
Center Spread: 2.45"
Overall Length: 5.882"

Our Winchester 88 mount is made specific to the gun.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories.

The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average.

Also, in many cases, it will not obstruct usage of factory iron sights.

EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

Add EGW's Practical or HD Scope Rings to make it a complete overhaul!

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

Made In The USA

Item Number Price  
42800 $40.00

 

EGW Winchester 88, 100 Picatinny Rail Scope Mount 20 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided
Center Spread: 2.45"
Overall Length: 5.882"

Our Winchester 88 mount is made specific to the gun.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories.

The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average.

Also, in many cases, it will not obstruct usage of factory iron sights.

EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

Add EGW's Practical or HD Scope Rings to make it a complete overhaul!

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

Made In The USA

Item Number Price  
42802 $40.00

 

EGW Winchester FN Picatinny Rail Mounts (#8-40 SCREWS) 0 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided
Center Spread: 3.52"
Overall Length: 6.670"

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories.

The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average.

Also, in many cases, it will not obstruct usage of factory iron sights.

EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

Add EGW's Practical or HD Scope Rings to make it a complete overhaul!

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

Made In The USA

 

Item Number Price  
42900 $40.00

 

EGW Winchester FN Picatinny Rail Mounts (#8-40 SCREWS) 20 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided
Center Spread: 3.52"
Overall Length: 6.670"

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories.

The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average.

Also, in many cases, it will not obstruct usage of factory iron sights.

EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

Add EGW's Practical or HD Scope Rings to make it a complete overhaul!

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

Made In The USA

Item Number Price  
42902 $40.00
 
EGW HD Winchester STD Picatinny Rail Scope Mount 0 MOA

 

 

Machined From: Solid 7075 T6 Aircraft Grade Aluminum
Finish: Matte Black Only
Compatible with Picatinny or Weaver scope rings.
Mounting Hardware: Socket Head Torx

 

 

Made In The USA

 

 

 

 

 

Item Number Price  
80600 $70.00

 

EGW HD Winchester STD Picatinny Rail Scope Mount 20 MOA

 

Machined From: Solid 7075 T6 Aircraft Grade Aluminum
Finish: Matte Black Only
Compatible with Picatinny or Weaver scope rings.
Mounting Hardware: Socket Head Torx

 

 

Made In The USA

 

 

 

 

 

 

Item Number Price  
80602 $70.00

 

EGW HD Winchester STD Picatinny Rail Scope Mount 30 MOA

 

Machined From: Solid 7075 T6 Aircraft Grade Aluminum
Finish: Matte Black Only
Compatible with Picatinny or Weaver scope rings.
Mounting Hardware: Socket Head Torx

 

 

Made In The USA

 

 

 

 

 

 

Item Number Price  
80603 $70.00

 

EGW HD Winchester WSM Scope Mount 0 MOA

 

Machined From: Solid 7075 T6 Aircraft Grade Aluminum
Finish: Matte Black Only
Compatible with Picatinny or Weaver scope rings.
Mounting Hardware: Socket Head Torx

 

 

Made In The USA

 

 

 

 

 

 

Item Number Price  
80610 $70.00

 

EGW HD Winchester WSM Scope Mount 20 MOA

 

Machined From: Solid 7075 T6 Aircraft Grade Aluminum
Finish: Matte Black Only
Compatible with Picatinny or Weaver scope rings.
Mounting Hardware: Socket Head Torx

 

 

Made In The USA

 

 

 

 

 

 

Item Number Price  
80612 $70.00
 

 

Amega Ranges Mini-Scout Mount-Model 94 Winchester

  This lightweight, bolt-on scope mount serves as the interface between the trusted and reliable Model 94 and state of the art modern sight systems.  NO PERMANENT MODIFICATIONS to the rifle or special tools are required to install this mount!  Positioning the mount and sight system in front of the receiver maintains the balance point for fast handling and leaves the ejection port clear for ease of operation.  Now you can use scout or pistol scopes, red-dot sights, or one of the many variations of tactical sights available.  You can also mount accessories like flashlights or lasers using the Tactical Light Mount Kit and a sling with the Quick Detachable Sling Mount Kit

parts included for winchester 94 mini mountRemington 870 Mini Mount
With the addition of a modern sight system and other accessories, the venerable Model 94 leaves nothing to be desired as a state of the art scout rifle.  In addition, your Grandpa might really get a kick out of taking his all-time favorite deer rifle back into the woods again.  With the  Mini-Scout-Mount-94 and a good scope he can enjoy hunting season again with his trusted Model 94 !

The 870 mount weighs 7.5 ounces, and 11.095 inches long.

Made In The USA

Remington 870 Mini Mount    Remington 870 Mini Mount

 

Remington 870 Mini Mount

 

Item Number Price  
AmegaScout16 $148.00

 

S&K Winchester 94 Scope Mount

S&K style 1" rings included

Works on both top and side eject models

Scope not Included

Made In The USA!!!

 

 

Item Number Description Price  
9465 S&K Winchester 94 Scope Mount w/S&K Style 1 Inch Rings $90.00

 

PRI Winchester Model 70 Short Action (Military) 7 Inch

Winchester Mod 70 short action steel base with full 1913 rail.

Base is constructed of 1141 steel with a parkerized finish and compatible with all Mil Spec products. Comes with mounting screws, Base is 7" in length and is ambidextrous. Weighs 5.2 ounces.

Made In The USA

Winchester Model 70 Short Action (Military) 7

Item Number Price  
02-218-03 $102.00

 

PRI Winchester Model 70 FN Special Police Rifle Short Action (Military) 7 Inch

FN Special Police Rifle Winchester Mod 70 short action steel base with full 1913 rail.

Base is constructed of 1141 steel with a parkerized finish and compatible with all Mil Spec products. Comes with #8-40 mounting screws, Base is 7" in length and is ambidextrous. Weighs 5.6 ounces.

Made In The USA

Winchester Model 70 FN Special Police Rifle Short Action (Military) 7

Item Number Price  
02-218-04 $98.00

 

PRI Winchester Model 70 Long Action (Military) 7 Inch

Winchester Mod 70 Long Action steel base with full 1913 rail.

Base is constructed of 1141 steel with a parkerized finish and compatible with all Mil Spec products. Comes with mounting screws, Base is 7" in length and is ambidextrous. Weighs 5.1 ounces.

Made In The USA

Winchester  Long Action (Military) 7

Item Number Price  
02-225-02 $102.00

 

PRI Winchester Model 70 Short Action Base

Winchester Mod 70 short action steel base with cut out over the action accepts weaver style rings.

Base is constructed of 1141 steel with a parkerized finish. Comes with mounting screws, Base is 7" in length Weighs 4.7 ounces.

Made In The USA

Winchester Short Action Base

Item Number Price  
02-218-01 $98.00

 

PRI Winchester Two Piece Long or Short Action Base

Winchester 2 piece high strength steel base can be used for long or short action.

Base is constructed of 1141 steel and has a parkerized finish. Base comes with mounting screws weighs 2.4 ounces.

Made In The USA

 

Item Number Price  
02-218-02 $98.00
 

 

 

Your privacy is important to us. Our Checkout page Your privacy is important to us. Our Checkout page uses the absolute highest level of Internet SSL Security and personal information is NOT sold or traded.

 

Can't find what you are looking for???  Contact Us  with the manufacturer, product number, and a detailed description of the product you are looking for. Please be very specific. We offer much more than what is on our site.

Errors including descriptive, photographic, pricing, and/or typographic are subject to correction at any time. Pricing does not include shipping or any applicable taxes. 

  2017, The Country Shed

RESTRICTED ITEMS   Some of the goods on The Country Shed website may be restricted in your delivery area by Federal, State, and/or Local law. The Country Shed  does not, and cannot grant the right or authority to persons to purchase items which may be regulated pursuant to such laws.  You must be 21 years of age to purchase anything from The Country Shed and it is your responsibility to check Federal, State, and/or Local laws to insure legal possession of such items in the delivery area.  Further, pursuant to 18 U.S.C. 922 (D)(1)-(9), you cannot be under a legal disability to purchase certain restricted items.

Scope Mounts, Mounts, Scopes, Compact Scopes, Stocks, Rifle,  Handgun, Pistol, Assualt  Weapons, Foregrips, Folding Stocks, Cleaning Kits, Sight Tools, Lasers, Flashlights, Tactical Gear, Magazines, Shotgun, Tactical Vests, Holsters, Light Rails, Picatinny Rails, SKS, AK-47, MAC-90, AR-15, M16, M1 Garand, M14, M1A, Mini-14, Mini-30, M1 Carbine, Hi-Point, H&K, CETME, FN FAL, Glock, Beretta, SAKO, Tikka, Remington, Winchester, Mossberg, Military Surplus, Jerky Guns, Jerky Spices, Meat Processing Supplies, Advanced Technology, Leapers,  UTG, AmegaRanges, Beretta, UltiMAK, TDI, Command Arms, First Samco, MPI Outdoors, Tapco, Buffer Technologies, Blackhawk, Choate,  MAKO,  Fab Defense, McGowan, Napier, NcStar, Streamlight, Sports Pictures, College Football, NFL, NHL, MLB, CFL, NASCAR, Jersey, Football, Baseball, Hockey, and more!!