The Country Shed 

Scopes, Mounts,& Accessories Tactical Shotgun Meat Processing Heated Gloves & Socks SAKO Tikka Beretta
Holsters Rifle Bases

Gun Accessories

Handgun / Pistol

DVD's and CD's

Rifle Stocks High Capacity Magazines Tools Disassembly Manuals Sling Shots
Flashlights & Lasers Shotgun Stocks Survival Gear

NFL & College Flags

General Accessories
Novelty And Gift Items Ammo Can Magnets & Stickers Dutch Ovens & Accessories Special Closeouts Slings & Swivel Sets

Home Contact Us Ordering Shipping & Policies Links What's New & Hot Gift Ideas Join Email List Special Closeouts

 

Savage Bases

EGW, Evolution Gun Works, PRI, Savage Scope Mount, Scope Base, Optics Mounting, 25, 42, Rascal, 210, 212, 64, 93, B Mag, Edge, Axis, Flat Back, Round Back, Mark II, F Class, Muzzleloader, 220 Slug Gun, Long Action, LA, Medium Action, MA, Short Action, SA, Sporter, 0 MOA, 10 MOA, 20 MOA, 30 MOA, 40 MOA, Left Hand, Right Hand, Silver, Black, Ejection Port, Drilled, Undrilled,  HD, Heavy Duty, Single Load

EGW Savage Round Back Short Action Picatinny Rail Scope Mount 0 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black 
Hardware: Hex head screws and wrench provided
Center Spread: 3.930"
Overall Length: 6.670"

This mount comes standard with a bevel on both sides making it ambidextrous.


This Savage base will work with any short action round back Savage rifle with an ejection port.

The round back on this mount will accommodate rounded receivers, and guns that have an accu-trigger. Savages without an accu-trigger will require our flat back mount (listed separately).

The middle spread is the distance between the two middle holes, center to center, on your receiver.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories.

The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average.

Also, in many cases, it will not obstruct usage of factory iron sights.

EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

Add EGW's Practical or HD Scope Rings to make it a complete overhaul!

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

Item Number Price  
41000 $40.00

 

EGW Savage 25 Picatinny Rail Scope Mount

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided

Our Savage 25 mount is made specific to the gun.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. EGWs one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

Add EGWs Practical or HD Scope Rings to make it a complete overhaul!

This mount is available in 0 MOA only.


This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

 

 

Made In The USA

Item Number Price  
41920 $40.00

 

EGW Savage 42 Picatinny Rail Scope Mount

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided

This one piece mount was specifically developed for the Savage 42.

Savage references Part #41942, however Part #41950 is the part number that you need for the 42.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. EGWs one piece scope mounts are the obvious choice for hunters and tactical shooters alike. This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite 

 

Made In The USA

 

 

Item Number Price  
41950 $30.00

 

EGW Savage A17 Picatinny Rail Scope Mount 0 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided
Center Spread: 3.181"
Overall Length: 5.882"

Our Savage A17 mount is made specific to the gun.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. EGWs one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

Add EGWs Practical or HD Scope Rings to make it a complete overhaul! 


This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

 

 

Item Number Price  
41980 $40.00

 

EGW Savage A17 Picatinny Rail Scope Mount 20 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided
Center Spread: 3.181"
Overall Length: 5.882"

Our Savage A17 mount is made specific to the gun.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. EGWs one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

Add EGWs Practical or HD Scope Rings to make it a complete overhaul! 

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

 

 

Item Number Price  
41982 $40.00

 

EGW Savage Long Action Sporter Mount 10 MOA

Our Sporter mount offers three cross slots on both the front and rear of the mount.

They have a large cut for the ejection port to make it more accessible.

They do not have a front overhang like our other mounts.

They are only available in 10 MOA. ***Note*** The Savage mounts are for round back receivers only

 

Made In The USA

 

 

 

Item Number Price  
39003 $40.00

 

EGW Savage Rascal Picatinny Rail Scope Mount

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided

This one piece mount was specifically developed for the Savage Rascal.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. EGWs one piece scope mounts are the obvious choice for hunters and tactical shooters alike. This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

This rail is only for right hand guns. We also offer this in a left hand bevel for the left hand gun - part #41961

 

Made In The USA

 

 

Item Number Price  
41960 $30.00

 

EGW Savage Short Action Sporter Mount 10 MOA

Our Sporter mount offers three cross slots on both the front and rear of the mount.

They have a large cut for the ejection port to make it more accessible.

They do not have a front overhang like our other mounts.

They are only available in 10 MOA. ***Note*** The Savage mounts are for round back receivers only

Made In The USA

 

 

 

 

Item Number Price  
39002 $40.00 Out Of Stock

 

EGW Savage 210 Picatinny Rail Scope Mount 0 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided

Our Savage 210 mount is made specific to the gun.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. EGWs one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

Add EGWs Practical or HD Scope Rings to make it a complete overhaul!

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

 

Made In The USA

 

 

Item Number Price  
41700 $40.00

 

EGW Savage 212 Picatinny Rail Scope Mount

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided

Our Savage 212 is made specific to the gun.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. EGWs one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

Add EGWs Practical or HD Scope Rings to make it a complete overhaul!

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

 

Made In The USA

 

 

Item Number Price  
41720 $40.00

 

EGW Savage 64 Picatinny Rail Scope Mount

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided

Our Savage 64 mount is made specific to the gun.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. EGWs one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

Add EGWs Practical or HD Scope Rings to make it a complete overhaul!

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

 

Made In The USA

 

 

Item Number Price  
41900 $40.00

 

EGW Savage 93 (1-5/8 Inch Ejection Port) Picatinny Rail Scope Mount 0 MOA Silver

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided

The bolt pattern on this mount works for Savage Mark II and 93 rifles. The difference between these mounts is the size of the ejection port.
Savage MK II mount - 1-3/8" ejection port
The Savage MK II mount will also fit the Savage MK I.
Savage 93 mount - 1/-5/8" ejection port
*If your gun is a Savage 93, it will have a 1-5/8" ejection port. If your gun is an older production Mark II, it will have a 1-3/8 ejection port. New production Mark II rifles have a 1-5/8" ejection port and require the use of our Savage 93 mount. Please measure the size of your ejection port prior to ordering to ensure the right fit.*

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. EGWs one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

Add EGWs Practical or HD Scope Rings to make it a complete overhaul!

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

Made In The USA

Item Number Price  
41610 $45.00

 

EGW Savage 93 (1-5/8 Inch Ejection Port) Picatinny Rail Scope Mount 0 MOA  -Undrilled

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided

The bolt pattern on this mount works for Savage Mark II and 93 rifles. The difference between these mounts is the size of the ejection port.
Savage MK II mount - 1-3/8" ejection port
The Savage MK II mount will also fit the Savage MK I.
Savage 93 mount - 1/-5/8" ejection port
*If your gun is a Savage 93, it will have a 1-5/8" ejection port. If your gun is an older production Mark II, it will have a 1-3/8 ejection port. New production Mark II rifles have a 1-5/8" ejection port and require the use of our Savage 93 mount. Please measure the size of your ejection port prior to ordering to ensure the right fit.*

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights

 

Made In The USA

Item Number Price  
41603 $40.00

 

EGW Savage 93 (1-5/8 Inch Ejection Port) Picatinny Rail Scope Mount 20 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided

The bolt pattern on this mount works for Savage Mark II and 93 rifles. The difference between these mounts is the size of the ejection port.
Savage MK II mount - 1-3/8" ejection port
The Savage MK II mount will also fit the Savage MK I.
Savage 93 mount - 1/-5/8" ejection port
*If your gun is a Savage 93, it will have a 1-5/8" ejection port. If your gun is an older production Mark II, it will have a 1-3/8 ejection port. New production Mark II rifles have a 1-5/8" ejection port and require the use of our Savage 93 mount. Please measure the size of your ejection port prior to ordering to ensure the right fit.*

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights.

 

Made In The USA

 

 

Item Number Price  
41602 $40.00

 

EGW Savage 93 (1-5/8 Inch Ejection Port) Picatinny Rail Scope Mount 20 MOA - Undrilled

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided

The bolt pattern on this mount works for Savage Mark II and 93 rifles. The difference between these mounts is the size of the ejection port.
Savage MK II mount - 1-3/8" ejection port
The Savage MK II mount will also fit the Savage MK I.
Savage 93 mount - 1/-5/8" ejection port
*If your gun is a Savage 93, it will have a 1-5/8" ejection port. If your gun is an older production Mark II, it will have a 1-3/8 ejection port. New production Mark II rifles have a 1-5/8" ejection port and require the use of our Savage 93 mount. Please measure the size of your ejection port prior to ordering to ensure the right fit.*


Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights.

 

Made In The USA

Item Number Price  
41604 $40.00

 

EGW Savage 93 (1-5/8 Inch Ejection Port) Picatinny Rail Scope Mounts 0 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided

The bolt pattern on this mount works for Savage Mark II and 93 rifles. The difference between these mounts is the size of the ejection port.
Savage MK II mount - 1-3/8" ejection port
The Savage MK II mount will also fit the Savage MK I.
Savage 93 mount - 1/-5/8" ejection port
*If your gun is a Savage 93, it will have a 1-5/8" ejection port. If your gun is an older production Mark II, it will have a 1-3/8 ejection port. New production Mark II rifles have a 1-5/8" ejection port and require the use of our Savage 93 mount. Please measure the size of your ejection port prior to ordering to ensure the right fit.*


Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights.

 

Made In The USA

Item Number Price  
41600 $40.00

 

EGW Savage B.Mag Picatinny Rail Scope Mount 0 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided

This scope mount fits the Savage B.Mag.

The middle spread is the distance between the two middle holes, center to center, on your receiver. The middle spread on our short action mount is 3.925".


Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights.

 

 

 

Made In The USA

 

Item Number Price  
41970 $40.00

 

EGW Savage B.Mag Picatinny Rail Scope Mount 20 MOA 

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided

This scope mount fits the Savage B.Mag.

The middle spread is the distance between the two middle holes, center to center, on your receiver. The middle spread on our short action mount is 3.925".


Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights

 

 

 

Made In The USA

 

Item Number Price  
41972 $40.00

 

EGW Savage Edge / Axis Picatinny Rail Scope Mount 0 MOA

 

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided

This mount is made specific to the new Savage Axis (formerly the Savage Edge) rifle. The bolt pattern on the mount works for any caliber of the rifle.


Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights

 

Made In The USA

 

 

 

Item Number Price  
41800 $40.00

 

EGW Savage Edge / Axis Picatinny Rail Scope Mount 0 MOA Silver

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided

This mount is made specific to the new Savage Axis (formerly the Savage Edge) rifle. The bolt pattern on the mount works for any caliber of the rifle.



Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights.

 

 

Made In The USA

 

 

 

Item Number Price  
41801 $45.00

 

EGW Savage Edge / Axis Picatinny Rail Scope Mount 20 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided

This mount is made specific to the new Savage Axis (formerly the Savage Edge) rifle. The bolt pattern on the mount works for any caliber of the rifle.

This mount is available in 0 or 20 MOA. Please see our FAQ section for more information on deciding which MOA you need.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights.

 

Made In The USA

 

 

 

Item Number Price  
41802 $40.00

 

EGW Savage Edge / Axis Picatinny Rail Scope Mount 20 MOA Silver

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided

This mount is made specific to the new Savage Axis (formerly the Savage Edge) rifle. The bolt pattern on the mount works for any caliber of the rifle.


Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights.

 

 

 

Made In The USA

 

 

Item Number Price  
41803 $45.00

 

EGW Savage Flat Back Long Action Picatinny Scope Mount 0 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided

Our Savage Flat Back mount works for long action older model Savage rifles that do not have an accu-trigger.

The middle spread is the distance between the two middle holes, center to center, on your receiver.

The middle spread on our long action mount is 4.612".

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories.

The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average.

Also, in many cases, it will not obstruct usage of factory iron sights.

EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

Add EGW's Practical or HD Scope Rings to make it a complete overhaul!

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

Made In The USA

Item Number Price  
41400 $40.00

 

EGW Savage Flat Back Long Action Picatinny Scope Mount 20 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided

Our Savage Flat Back mount works for long action older model Savage rifles that do not have an accu-trigger.

The middle spread is the distance between the two middle holes, center to center, on your receiver.

The middle spread on our long action mount is 4.612".

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories.

The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average.

Also, in many cases, it will not obstruct usage of factory iron sights.

EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

Add EGW's Practical or HD Scope Rings to make it a complete overhaul!

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

Made In The USA

Item Number Price  
41402 $40.00

 

EGW Savage Flat Back Medium Action Picatinny Scope Mount 0 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided

Our Savage Flat Back mount works for medium action older model Savage rifles that do not have an accu-trigger.

The middle spread is the distance between the two middle holes, center to center, on your receiver.

The middle spread on our medium action mount is 4.09".

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories.

The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights.

EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

Add EGW's Practical or HD Scope Rings to make it a complete overhaul!

Available in matte black. Custom silver anodizing is available upon request, at an additional charge of $15 (there is also a 3 month lead time associated with silver anodizing. Please give us a call if you'd like to place a custom order).

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

Made In The USA

Item Number Price  
41300 $40.00

 

EGW Savage Flat Back Medium Action Picatinny Scope Mount 20 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided

Our Savage Flat Back mount works for medium action older model Savage rifles that do not have an accu-trigger.

The middle spread is the distance between the two middle holes, center to center, on your receiver.

The middle spread on our medium action mount is 4.09".

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories.

The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights.

EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

Add EGW's Practical or HD Scope Rings to make it a complete overhaul!

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

Made In The USA

Item Number Price  
41302 $40.00

 

EGW Savage Flat Back Short Action Picatinny Scope Mount 0 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided

Our Savage Flat Back mount works for short action older model Savage rifles that do not have an accu-trigger.

The middle spread is the distance between the two middle holes, center to center, on your receiver.

The middle spread on our short action mount is 3.925". 


Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories.

The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average.

Also, in many cases, it will not obstruct usage of factory iron sights.

EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

Add EGW's Practical or HD Scope Rings to make it a complete overhaul!

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

Made In The USA

Item Number Price  
41200 $40.00

 

EGW Savage Flat Back Short Action Picatinny Scope Mount 20 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided

Our Savage Flat Back mount works for short action older model Savage rifles that do not have an accu-trigger.

The middle spread is the distance between the two middle holes, center to center, on your receiver.

The middle spread on our short action mount is 3.925". 

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories.

The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average.

Also, in many cases, it will not obstruct usage of factory iron sights.

EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

Add EGW's Practical or HD Scope Rings to make it a complete overhaul!

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

Made In The USA

Item Number Price  
41202 $40.00

 

EGW Savage Mark II (1-3/8 Inch Ejection Port) Picatinny Rail Scope Mount 0 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided

The bolt pattern on this mount works for Savage Mark II and 93 rifles.

The difference between these mounts is the size of the ejection port.

Savage MK II mount - 1-3/8" ejection port The Savage MK II mount will also fit the Savage MK I.
Savage 93 mount - 1/-5/8" ejection port *If your gun is a Savage 93, it will have a 1-5/8" ejection port.
If your gun is an older production Mark II, it will have a 1-3/8 ejection port.
New production Mark II rifles have a 1-5/8" ejection port and require the use of our Savage 93 mount.

Please measure the size of your ejection port prior to ordering to ensure the right fit.*

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories.

The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average.

Also, in many cases, it will not obstruct usage of factory iron sights.

EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

Add EGW's Practical or HD Scope Rings to make it a complete overhaul!

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

Made In The USA

Item Number Price  
41500 $40.00

 

EGW Savage Mark II (1-3/8 Inch Ejection Port) Picatinny Rail Scope Mount 20 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided

The bolt pattern on this mount works for Savage Mark II and 93 rifles.

The difference between these mounts is the size of the ejection port.

Savage MK II mount - 1-3/8" ejection port The Savage MK II mount will also fit the Savage MK I.
Savage 93 mount - 1/-5/8" ejection port *If your gun is a Savage 93, it will have a 1-5/8" ejection port.
If your gun is an older production Mark II, it will have a 1-3/8 ejection port.
New production Mark II rifles have a 1-5/8" ejection port and require the use of our Savage 93 mount.

Please measure the size of your ejection port prior to ordering to ensure the right fit.*

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories.

The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average.

Also, in many cases, it will not obstruct usage of factory iron sights.

EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

Add EGW's Practical or HD Scope Rings to make it a complete overhaul!

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

Made In The USA

Item Number Price  
41502 $40.00

 

EGW Savage Mark II UNDRILLED (1-3/8 Inch Ejection Port) Picatinny Rail Scope Mount 0 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided

The bolt pattern on this mount works for Savage Mark II and 93 rifles. The difference between these mounts is the size of the ejection port.
Savage MK II mount - 1-3/8" ejection port
The Savage MK II mount will also fit the Savage MK I.
Savage 93 mount - 1/-5/8" ejection port
*If your gun is a Savage 93, it will have a 1-5/8" ejection port. If your gun is an older production Mark II, it will have a 1-3/8 ejection port. New production Mark II rifles have a 1-5/8" ejection port and require the use of our Savage 93 mount. Please measure the size of your ejection port prior to ordering to ensure the right fit.*

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. EGWs one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

Add EGWs Practical or HD Scope Rings to make it a complete overhaul!

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

Made In The USA

Item Number Price  
41503 $40.00

 

EGW HD F-Class Savage Round Back Short Action Picatinny Rail Scope Mount Single Load 20 MOA

Machined From: Solid 7075 T6 Aircraft Grade Aluminum
Finish: Matte Black Only
Compatible with Picatinny or Weaver scope rings

 

Made In The USA

 

 

 

 

 

 

 

 

Item Number Price  
80322 $90.00

 

EGW HD F-Class Savage Round Back Short Action Picatinny Rail Scope Mount w/ Ejection Port 0 MOA

Machined From: Solid 7075 T6 Aircraft Grade Aluminum
Finish: Matte Black Only
Compatible with Picatinny or Weaver scope rings.

 

Made In The USA

 

 

 

 

 

 

 

 

Item Number Price  
80310 $90.00

 

EGW HD F-Class Savage Round Back Short Action Picatinny Rail Scope Mount w/ Ejection Port 20 MOA

Machined From: Solid 7075 T6 Aircraft Grade Aluminum
Finish: Matte Black Only
Compatible with Picatinny or Weaver scope rings.

 

 

Made In The USA

 

 

 

 

 

 

 

Item Number Price  
80312 $90.00

 

EGW Steel HD Savage Long Action Round Back Picatinny Rail Scope Mount 0 MOA

 

 

Compatible with Picatinny or Weaver scope rings

 

 

Made In The USA

 

 

 

 

 

 

Item Number Price  
86300 $120.00

 

EGW Savage Round Back F-Class 3 Inch Ext Short Action Picatinny Rail Scope Mount 0 MOA Single Load

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided

Made In The USA

Item Number Price  
41040 $70.00

 

EGW Savage Round Back F-Class 3 Inch Ext Short Action Picatinny Rail Scope Mount 0 MOA w/ Ejection Port

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided
Center Spread: 3.930"

Made In The USA

Item Number Price  
41030 $70.00

 

EGW Savage Round Back F-Class 3 Inch Ext Short Action Picatinny Rail Scope Mount 20 MOA Single Load

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided

Made In The USA

Item Number Price  
41042 $70.00

 

EGW Savage Round Back F-Class 3 Inch Ext Short Action Picatinny Rail Scope Mount 20 MOA w/ Ejection Port

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided

Made In The USA

 

Item Number Price  
41032 $70.00 Out Of Stock

 

EGW Savage Round Back Long Action Picatinny Rail Scope Mount 0 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided
Center Spread: 4.630"
Overall Length: 7.458"

This mount does NOT fit the 212
Our Savage bases will work with any long action round back Savage rifle with an ejection port.

The round back on this mount will accommodate rounded receivers, and guns that have an accu-trigger.

Savages without an accu-trigger will require our flat back mount, NOT this mount.

The middle spread is the distance between the two middle holes, center to center, on your receiver.

The middle spread on our long action mount is 4.625". 

Our Long Action Round Back 0 MOA base is recommended by Savage for use with their 220 Slug gun. Savage will instruct you to order using our old part number #2120. The newly assigned part number for this item is #41100. Please order part number #41100 or #41101, which is a specific mount for the 220, if you are purchasing a mount for the Savage 220 Slug gun.

Our mount is drilled for and provided with 6-48 Hex Head screws. Some Long Action Savage guns (like the .338 Lapua or 110 BA) require 8-40 screws. We recommend the HD Savage Round Back Long Action part #80330 or #80332 for these. Our mount is counter-sunk for 8-40 screws. 

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories.

The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights.

EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

A Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

Made In The USA

Item Number Price  
41100 $40.00

 

EGW Savage Round Back Long Action Picatinny Rail Scope Mount 0 MOA Silver

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Silver Anodized
Mounting Hardware: Hex head screws and wrench provided

This mount does NOT fit the 212
Our Savage bases will work with any long action round back Savage rifle with an ejection port.

The round back on this mount will accommodate rounded receivers, and guns that have an accu-trigger.

Savages without an accu-trigger will require our flat back mount, NOT this mount.

The middle spread is the distance between the two middle holes, center to center, on your receiver.

The middle spread on our long action mount is 4.625".

Our Long Action Round Back 0 MOA base is recommended by Savage for use with their 220 Slug gun. Savage will instruct you to order using our old part number #2120. The newly assigned part number for this item is #41100. Please order part number #41100 or #41101, which is a specific mount for the 220, if you are purchasing a mount for the Savage 220 Slug gun.

Our mount is drilled for and provided with 6-48 Hex Head screws. Some Long Action Savage guns (like the .338 Lapua or 110 BA) require 8-40 screws. We recommend the HD Savage Round Back Long Action part #80330 or #80332 for these. Our mount is counter-sunk for 8-40 screws. 

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories.

The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights.

EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

Add EGW's Practical or HD Scope Rings to make it a complete overhaul! Available in matte black and silver.

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

Made In The USA

Item Number Price  
41110 $45.00

 

EGW Savage Round Back Long Action Picatinny Rail Scope Mount 20 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided

This mount does NOT fit the 212
Our Savage bases will work with any long action round back Savage rifle with an ejection port.

The round back on this mount will accommodate rounded receivers, and guns that have an accu-trigger.

Savages without an accu-trigger will require our flat back mount, NOT this mount.

The middle spread is the distance between the two middle holes, center to center, on your receiver.

The middle spread on our long action mount is 4.625". 

Our Long Action Round Back 0 MOA base is recommended by Savage for use with their 220 Slug gun. Savage will instruct you to order using our old part number #2120. The newly assigned part number for this item is #41100. Please order part number #41100 or #41101, which is a specific mount for the 220, if you are purchasing a mount for the Savage 220 Slug gun.

Our mount is drilled for and provided with 6-48 Hex Head screws. Some Long Action Savage guns (like the .338 Lapua or 110 BA) require 8-40 screws. We recommend the HD Savage Round Back Long Action part #80330 or #80332 for these. Our mount is counter-sunk for 8-40 screws. 

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories.

The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights.

EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

Add EGW's Practical or HD Scope Rings to make it a complete overhaul! Available in matte black and silver.

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

Made In The USA

Item Number Price  
41102 $40.00

 

EGW Savage Round Back Long Action Picatinny Rail Scope Mount 20 MOA Silver

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Silver Anodized
Mounting Hardware: Hex head screws and wrench provided

This mount does NOT fit the 212
Our Savage bases will work with any long action round back Savage rifle with an ejection port.

The round back on this mount will accommodate rounded receivers, and guns that have an accu-trigger.

Savages without an accu-trigger will require our flat back mount, NOT this mount.

The middle spread is the distance between the two middle holes, center to center, on your receiver.

The middle spread on our long action mount is 4.625". This mount is available in 0 or 20 MOA. Please see our FAQ pages for more information on action lengths and MOA.

Our Long Action Round Back 0 MOA base is recommended by Savage for use with their 220 Slug gun. Savage will instruct you to order using our old part number #2120. The newly assigned part number for this item is #41100. Please order part number #41100 or #41101, which is a specific mount for the 220, if you are purchasing a mount for the Savage 220 Slug gun.

Our mount is drilled for and provided with 6-48 Hex Head screws. Some Long Action Savage guns (like the .338 Lapua or 110 BA) require 8-40 screws. We recommend the HD Savage Round Back Long Action part #80330 or #80332 for these. Our mount is counter-sunk for 8-40 screws. 

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories.

The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights.

EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

Made In The USA

Item Number Price  
41112 $45.00

 

EGW HD Savage Round Back Long Action Picatinny Rail Scope Mount 20 MOA Drilled for #8s

Machined From: Solid 7075 T6 Aircraft Grade Aluminum
Finish: Matte Black Only
Compatible with Picatinny or Weaver scope rings. 
Mounting Hardware: Socket Head Torx Screws and Wrench Provided
Center Spread: 4.63"
Overall Length of Mount: 7.458"

This HD Savage base will work with any long action round back Savage rifle that is drilled for #8 screws. We supply T-10 #8-40 screws.

The round back on this mount will accommodate rounded receivers, and guns that have an accu-trigger. 

Savages without an accu-trigger will require our flat back mount (listed separately). Our mount is drilled for and provided with 8-40 Torx Head screws. Some Long Action Savage guns (like the .338 Lapua or 110 BA) require 8-40 screws. This mount will work for the Savage 112.


*The center spread is the distance between the two middle holes, center to center, on your receiver.

These bases sit at approximately 0.35 high.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The cross slots are also machined the full width of the mount and gauged to MIL-STD 1913 specs maintaining tolerances of +/-.002".

After machining; the mounts are tumbled and sand blasted. The aluminum mounts are Type III hard coat anodized for long lasting durability. The steel rails are Mil Spec parkerized for a durable rust resistant finish. 

Compatible with Picatinny or Weaver scope rings. Add EGWs HD Scope Rings to make it a complete package! 

From manufacturing to packaging, EGWs products are made with pride in the USA.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

Item Number Price  
80332-8 $70.00 Out Of Stock

 

EGW Savage Round Back Muzzle Loader Picatinny Rail Mount

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided

Our Savage Muzzleloader mount is made specific to the gun.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories.

The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average.

Also, in many cases, it will not obstruct usage of factory iron sights.

EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

Add EGW's Practical or HD Scope Rings to make it a complete overhaul!

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite 

 

Made In The USA

 

Item Number Price  
41018 $40.00

 

EGW Savage Round Back Muzzle Loader Silver Picatinny Rail Mount

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided
Center Spread: 3.930"
Overall Length: 7.064"

Our Savage Muzzleloader mount is made specific to the gun.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories.

The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights.

EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

Add EGW's Practical or HD Scope Rings to make it a complete overhaul! This mount is available in 0 MOA only.

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

Made In The USA

Item Number Price  
41019 $45.00

 

EGW Savage Round Back Short Action Picatinny Rail Scope Mount 0 MOA Silver

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Silver Anodized
Hardware: Hex head screws and wrench provided
Center Spread: 3.930"
Overall Length: 6.670"

This Savage base will work with any short action round back Savage rifle with an ejection port. 

The round back on this mount will accommodate rounded receivers, and guns that have an accu-trigger. Savages without an accu-trigger will require our flat back mount (listed separately). 

The middle spread is the distance between the two middle holes, center to center, on your receiver. 

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. 

The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average.

Also, in many cases, it will not obstruct usage of factory iron sights.

EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike. 

Add EGW's Practical or HD Scope Rings to make it a complete overhaul! 

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings. 

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

Made In The USA

Item Number Price  
41010 $45.00
 

 

EGW Savage Round Back Short Action Picatinny Rail Scope Mount 20 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black 
Hardware: Hex head screws and wrench provided
Center Spread: 3.930"
Overall Length: 6.670"

This Savage base will work with any short action round back Savage rifle with an ejection port. 

The round back on this mount will accommodate rounded receivers, and guns that have an accu-trigger. Savages without an accu-trigger will require our flat back mount , NOT this mount. 

The middle spread is the distance between the two middle holes, center to center, on your receiver. 

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. 

The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average.

Also, in many cases, it will not obstruct usage of factory iron sights.

EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike. 

Add EGW's Practical or HD Scope Rings to make it a complete overhaul! 

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings. 

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

Made In The USA

Item Number Price  
41002 $40.00

 

EGW Savage Round Back Short Action Picatinny Rail Scope Mount 20 MOA Silver

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Silver Anodized
Mounting Hardware: Hex head screws and wrench provided
Center Spread: 3.930"
Overall Length: 6.670"

This Savage base will work with any short action round back Savage rifle with an ejection port. 

The round back on this mount will accommodate rounded receivers, and guns that have an accu-trigger. Savages without an accu-trigger will require our flat back mount , NOT this mount. 

The middle spread is the distance between the two middle holes, center to center, on your receiver. 

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. 

The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average.

Also, in many cases, it will not obstruct usage of factory iron sights.

EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike. 

Add EGW's Practical or HD Scope Rings to make it a complete overhaul! 

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings. 

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

Made In The USA

Item Number Price  
41012 $45.00

 

EGW Savage Shortened 220 Slug Gun Picatinny Rail Scope Mount 0 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided
Center Spread: 4.630"
Overall Length: 6.850"

This mount does NOT fit the 212

The round back on this mount will accommodate rounded receivers, and guns that have an accu-trigger.

Savages without an accu-trigger will require our flat back mount, NOT this mount

The middle spread is the distance between the two middle holes, center to center, on your receiver.

We shortened the mount to allow for the use of a shotgun scope. This should alleviate issues with the bell hitting the front of the scope mount on the regular Savage Long Action Scope Mount.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories.

The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights.

EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

Add EGW's Practical or HD Scope Rings to make it a complete overhaul!

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

Made In The USA

Item Number Price  
41101 $40.00

 

EGW HD Savage Round Back Long Action Picatinny Rail Scope Mount 0 MOA

Our HD Savage bases will work with any long action round back Savage rifle. The round back on this mount will accommodate rounded receivers, and guns that have an accu-trigger. Savages without an accu-trigger will require our flat back mount , NOT this mount. Our mount is drilled for and provided with 6-48 Torx Head screws. Some Long Action Savage guns (like the .338 Lapua or 110 BA) require 8-40 screws. Our mount is counter-sunk for 8-40 screws. The middle spread is the distance between the two middle holes, center to center, on your receiver. The middle spread on our long action mount is 4.625". These HD one-piece scope mounts are precision machined from solid 7075 T6 (max hardness) aircraft grade aluminum. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The cross slots are also machined the full width of the mount and gauged to MIL-STD 1913 specs maintaining tolerances of +/-.002". EGW's Heavy Duty (HD) mounts are lower in height than our tactical rails, which reduces weight and gives the shooter a better cheek weld. After machining; the mounts are tumbled and sand blasted. Add EGW's HD Scope Rings to make it a complete package! From manufacturing to packaging, EGW's products are made with pride in the USA. Machined From: Solid 7075 T6 Aircraft Grade Aluminum Finish: Matte Black Only Compatible with Picatinny or Weaver scope rings. Mounting Hardware: Socket Head Torx

 

 

Made In The USA

 

Item Number Price  
80330 $70.00

 

EGW HD Savage Round Back Long Action Picatinny Rail Scope Mount 20 MOA

Our HD Savage bases will work with any long action round back Savage rifle. The round back on this mount will accommodate rounded receivers, and guns that have an accu-trigger. Savages without an accu-trigger will require our flat back mount, NOT this mount. Our mount is drilled for and provided with 6-48 Torx Head screws. Some Long Action Savage guns (like the .338 Lapua or 110 BA) require 8-40 screws. Our mount is counter-sunk for 8-40 screws. The middle spread is the distance between the two middle holes, center to center, on your receiver. The middle spread on our long action mount is 4.625". These HD one-piece scope mounts are precision machined from solid 7075 T6 (max hardness) aircraft grade aluminum. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The cross slots are also machined the full width of the mount and gauged to MIL-STD 1913 specs maintaining tolerances of +/-.002". EGW's Heavy Duty (HD) mounts are lower in height than our tactical rails, which reduces weight and gives the shooter a better cheek weld. After machining; the mounts are tumbled and sand blasted. Add EGW's HD Scope Rings to make it a complete package! From manufacturing to packaging, EGW's products are made with pride in the USA. Machined From: Solid 7075 T6 Aircraft Grade Aluminum Finish: Matte Black Only Compatible with Picatinny or Weaver scope rings. Mounting Hardware: Socket Head Torx

 

Made In The USA

 

 

Item Number Price  
80332 $70.00

 

EGW HD Savage Round Back Short Action Picatinny Rail Scope Mount 0 MOA

 

Machined From: Solid 7075 T6 Aircraft Grade Aluminum
Finish: Matte Black Only
Compatible with Picatinny or Weaver scope rings.

 

 

 

Made In The USA

 

 

 

 

 

 

Item Number Price  
80300 $70.00

 

EGW HD Savage Round Back Short Action Picatinny Rail Scope Mount 20 MOA

 

Machined From: Solid 7075 T6 Aircraft Grade Aluminum
Finish: Matte Black Only
Compatible with Picatinny or Weaver scope rings.

These mounts now come standard with a left hand bevel.

 

 

Made In The USA

 

 

 

 

 

Item Number Price  
80302 $70.00

 

EGW HD F-Class Savage Round Back Short Action Picatinny Rail Scope Mounts Single Load 0 MOA

Machined From: Solid 7075 T6 Aircraft Grade Aluminum
Finish: Matte Black Only
Compatible with Picatinny or Weaver scope rings.

 

Made In The USA

 

 

 

 

 

 

 

 

Item Number Price  
80320 $90.00

 

EGW Steel HD Savage Long Action Round Back Picatinny Rail Scope Mount 20 MOA

 

Compatible with Picatinny or Weaver scope rings.

 

Made In The USA

 

 

 

 

 

 

 

 

Item Number Price  
86302 $120.00

 

EGW Steel HD Savage Short Action Round Back Picatinny Rail Scope Mount 0 MOA

 

Compatible with Picatinny or Weaver scope rings

 

Made In The USA

 

 

 

 

 

 

 

 

 

Item Number Price  
86200 $120.00

 

EGW Steel HD Savage Short Action Round Back Picatinny Rail Scope Mount 20 MOA

 

Compatible with Picatinny or Weaver scope rings.

 

Made In The USA

 

 

 

 

 

 

 

 

Item Number Price  
86202 $120.00 Out Of Stock

 

PRI Savage Short Action Base

Savage Short Action Tactical Base 4140 steel construction compatible with all Mil. Spec. products.

Savage Short Action Base

Item Number Price  
02-176-01 $102.00

 

PRI Savage Two Piece Long or Short Action Tactical Base

Savage Two Piece long or short action tactical base 4140 steel construction compatible with all Mil. Spec. products.

 

 

Savage Two Piece Long or Short Action Tactical Base

Item Number Price  
02-176-02 $98.00

 

PRI Savage Short Action full 1913 Railed Base

Savage Short Action Full 1913 Railed Base Original style tactical base 4140 steel construction compatible with all Mil. Spec. products.

Savage Short Action full 1913 Railed Base

Item Number Price  
02-176-03 $102.00

 

PRI Savage Accu Trigger Base

Savage Accu Trigger Short Action Tactical Base has a front and rear raaised mounting surface 4140 steel construction

Savage Accu Trigger Base

Item Number Price  
02-176-04 $102.00

 

PRI Savage Accu Trigger Short Action full 1913 Railed Base

Savage Accu Trigger Short Action Full 1913 Railed Base The NEW Base has radiused front and rear mounting surfaces 4140 steel construction compatible with all Mil. Spec. products

Savage Accu Trigger Short Action full 1913 Railed Base

Item Number Price  
02-176-05 $102.00

 

PRI Savage Long Action Style

Savage Long Action Style A Tactical Base designed to accommodate compact scopes or night vision devices 4140 steel construction Compatible with all Mil. Spec. products.

Savage Long Action Style

Item Number Price  
02-177-01 $102.00

 

PRI Savage Long Action Full 1913 Railed Base

Savage Long Action Full 1913 Railed Base Original style tactical base 4140 steel construction compatible with all Mil. Spec. products.

Savage Long Action Full 1913 Railed Base

Item Number Price  
02-177-02 $102.00

 

PRI Savage Accu Trigger long action Base

Savage Accu Trigger Long Action Tactical Base. The NEW Base has radiused front and rear mounting surfaces 4140 steel construction compatible with all Mil. Spec. products.

Savage Accu Trigger long action Base

Item Number Price  
02-177-03 $102.00

 

PRI Savage Accu Trigger Long Action full 1913 Railed Base

Savage Accu Trigger Long Action Full 1913 Railed Base The NEW Base has radiused front and rear mounting surfaces 4140 steel construction compatible with all Mil. Spec. products.

Savage Accu Trigger Long Action full 1913 Railed Base

Item Number Price  
02-177-04 $102.00
 

 

 

Your privacy is important to us. Our Checkout page Your privacy is important to us. Our Checkout page uses the absolute highest level of Internet SSL Security and personal information is NOT sold or traded.

 

 

Can't find what you are looking for???  Contact Us  with the manufacturer, product number, and a detailed description of the product you are looking for. Please be very specific. We offer much more than what is on our site.

Errors including descriptive, photographic, pricing, and/or typographic are subject to correction at any time. Pricing does not include shipping or any applicable taxes. 

  2017, The Country Shed

RESTRICTED ITEMS   Some of the goods on The Country Shed website may be restricted in your delivery area by Federal, State, and/or Local law. The Country Shed  does not, and cannot grant the right or authority to persons to purchase items which may be regulated pursuant to such laws.  You must be 21 years of age to purchase anything from The Country Shed and it is your responsibility to check Federal, State, and/or Local laws to insure legal possession of such items in the delivery area.  Further, pursuant to 18 U.S.C. 922 (D)(1)-(9), you cannot be under a legal disability to purchase certain restricted items.

Scope Mounts, Mounts, Scopes, Compact Scopes, Stocks, Rifle,  Handgun, Pistol, Assualt  Weapons, Foregrips, Folding Stocks, Cleaning Kits, Sight Tools, Lasers, Flashlights, Tactical Gear, Magazines, Shotgun, Tactical Vests, Holsters, Light Rails, Picatinny Rails, SKS, AK-47, MAC-90, AR-15, M16, M1 Garand, M14, M1A, Mini-14, Mini-30, M1 Carbine, Hi-Point, H&K, CETME, FN FAL, Glock, Beretta, SAKO, Tikka, Remington, Winchester, Mossberg, Military Surplus, Jerky Guns, Jerky Spices, Meat Processing Supplies, Advanced Technology, Leapers,  UTG, AmegaRanges, Beretta, UltiMAK, TDI, Command Arms, First Samco, MPI Outdoors, Tapco, Buffer Technologies, Blackhawk, Choate,  MAKO,  Fab Defense, McGowan, Napier, NcStar, Streamlight, Sports Pictures, College Football, NFL, NHL, MLB, CFL, NASCAR, Jersey, Football, Baseball, Hockey, and more!!