The Country Shed 

Mounts and Scopes Tactical Shotgun Meat Processing Heated Gloves & Socks SAKO Tikka Beretta
Holsters Rifle Bases

Gun Accessories

Handgun / Pistol

DVD's and CD's

Rifle Stocks High Capacity Magazines Tools Disassembly Manuals Sling Shots
Flashlights & Lasers Shotgun Stocks Survival Gear

Special Closeouts

General Accessories
Novelty And Gift Items

Ammo Can Magnets & Stickers

NFL & College Flags

Slings & Swivel Sets

Home Contact Us Ordering Shipping & Policies Links What's New & Hot Gift Ideas Join Email List Special Closeouts

 

Ruger Bases

EGW, Evolution Gun Works, Ruger Bases, Scope Mounts, Optics Mounting, 10-22, 1022, American long Action, American Rimfire, M77, Ruger Revolver, 0 MOA, 20 MOA, Silver, Black, Takedown, Drilled, Undrilled, No 1 HD, Heavy Duty

 

UTG PRO Made in USA Ruger® 10/22® Picatinny Rail Mount

Proudly Designed and Made in USA

• The Michigan Difference- Enhanced Precision, Material Strength and Quality Control, Replacing Our Classic MNT-22TOWL

• Precision Machined from Aircraft Grade Aluminum with Matte Black Hard Coat Anodize

• 4.67" Overall Length with 11 Picatinny Rail Slots for Dot Sights, Rear Sights, and Flexible Positioning of Magnified Optics for Proper Eye Relief Adjustment

• Low Profile Design with U-cut for Weight Reduction

• Contoured Bottom Perfectly Fits Ruger® 10/22® with Drilled and Tapped Receiver

• Includes Assembly Screws for Simple and Friendly Installation, No Gunsmith Required

Material: Aluminum
Weight: 1.3 oz
Pieces: 1
Rail Type: Picatinny/Weaver
No. of Rails: 1
Length: 4.67 inch
Width: 0.83 inch
Height: 0.35 inch

Item Number Price  
MTU030T22 $20.00

 

EGW Ruger 10-22 Picatinny Rail Scope Mount 0 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided

Our Ruger 10-22 mount is made specific to the gun.

This scope mount will not fit the 10-22 takedown.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights.

 

Made In The USA

 

 

 

 

Item Number Price  
46100 $40.00

 

EGW Ruger 10-22 Picatinny Rail Scope Mount 0 MOA Silver

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided

Our Ruger 10-22 mount is made specific to the gun.

This scope mount will not fit the 10-22 takedown. We will be coming out with a new 10-22 scope mount soon that will alleviate this issue.

This mount is available in a 0 or 20 MOA. Please see our FAQ pages for further information on action lengths and MOA.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights.

 

 

Made In The USA

Item Number Price  
46110 $45.00

 

EGW Ruger 10-22 Picatinny Rail Scope Mount 20 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided

Our Ruger 10-22 mount is made specific to the gun.

This scope mount will not fit the 10-22 takedown. We will be coming out with a new 10-22 scope mount soon that will alleviate this issue.

This mount is available in a 0 or 20 MOA. Please see our FAQ pages for further information on action lengths and MOA.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights.

 

Made In The USA

 

 

Item Number Price  
46102 $40.00

 

EGW Ruger 10-22 Picatinny Rail Scope Mount 20 MOA Silver

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided

Our Ruger 10-22 mount is made specific to the gun.

This scope mount will not fit the 10-22 takedown. 

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights

 

 

Made In The USA

 

 

 

Item Number Price  
46112 $45.00

 

EGW Ruger 10-22 Takedown Picatinny Rail Scope Mount

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided

Our Ruger 10-22 mount is made specific to the gun.

This scope mount will fit the 10-22, 10-22 takedown and is lowered to allow for use of rear sight with mount mounted.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. EGW’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

Add EGW’s Practical or HD Scope Rings to make it a complete overhaul!

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

 

Made In The USA

Item Number Price  
46101 $30.00 Out Of Stock

 

EGW Ruger 10-22 Undrilled Picatinny Rail Scope Mount 0 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided

Our Ruger 10-22 mount is made specific to the gun.

This scope mount will not fit the 10-22 takedown. 

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. EGW’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

Add EGW’s Practical or HD Scope Rings to make it a complete overhaul!

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

 

 

Made In The USA

Item Number Price  
46100-U $40.00

 

EGW Ruger 10-22 Takedown Picatinny Rail Scope Mount Silver

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Silver Anodized
Mounting Hardware: Hex head screws and wrench provided
Center Spread: 2.57"
Overall Length: 4.645"

Our Ruger 10-22 mount is made specific to the gun. 

This scope mount will fit the 10-22, 10-22 takedown and is lowered to allow for use of rear sight with mount mounted.

This mount is available in a 0 MOA.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. EGW’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

Add EGW’s Practical or HD Scope Rings to make it a complete overhaul!

This mount is silver anodized.

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

Item Number Price  
46111 $35.00

 

EGW Ruger American Long Action Scope Mount 0 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided

This mount fits the Ruger American Long Action

 

 

Made In The USA

 

 

 

 

 

 

Item Number Price  
46160 $40.00

 

EGW Ruger American Long Action Scope Mount 20 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided

This mount fits the Ruger American Long Action.

 

 

Made In The USA

 

 

 

 

 

 

Item Number Price  
46162 $40.00

 

EGW Ruger American Rimfire

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided

This scope mount fits the Ruger American Rimfire.

All bases sit at approximately 0.4” high.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. EGW’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike.
This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Add EGW’s Practical or HD Scope Rings to make it a complete overhaul!

We machine these in our shop using one of our USA-made Fadal machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability.

The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

Made In The USA

Item Number Price  
46170 $40.00

 

EGW Ruger American Short Action Scope Mount 0 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided
This mount fits the Ruger American Short Action.

 

 

Made In The USA

 

 

 

 

 

 

 

Item Number Price  
46150 $40.00

 

EGW Ruger American Short Action Scope Mount 20 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided
This mount fits the Ruger American Short Action.

 

Made In The USA

 

 

 

 

 

 

 

 

Item Number Price  
46152 $40.00

 

EGW Ruger M-77 Long Action Picatinny Rail Mount Silver 0 MOA (MUST DRILL & TAP RECEIVER)

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided

This mount is sold DRILLED for 8-40 screws This mount will require you to drill and tap your receiver. 

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. EGW’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

Add EGW’s Practical or HD Scope Rings to make it a complete overhaul!

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

 

Made In The USA

 

Item Number Price  
46130 $45.00
 
EGW Ruger M-77 Long Action Picatinny Rail Mounts (MUST DRILL & TAP RECEIVER) 0 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided

This mount is sold DRILLED for 8-40 screws. This mount will require you to drill and tap your receiver. 


Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights.

 

Made In The USA

 

 

 

 

Item Number Price  
46120 $40.00

 

EGW Ruger M-77 Long Action Picatinny Rail Mounts (MUST DRILL & TAP RECEIVER) 20 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided

This mount is sold DRILLED for 8-40 screws. This mount will require you to drill and tap your receiver. 

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights.

 

Made In The USA

 

 

 

 

 

Item Number Price  
46122 $40.00

 

EGW Ruger M-77 Short Actions (MUST DRILL & TAP RECEIVER) 0 MOA

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided

This mount is sold DRILLED for 8-40 screws. This mount will require you to drill and tap your receiver. 

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights.

 

 

Made In The USA

 

 

 

 

Item Number Price  
46140 $40.00

 

EGW Ruger M-77 Short Action 20 MOA (MUST DRILL & TAP RECEIVER)

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided

This mount is sold DRILLED for 8-40 screws. This mount will require you to drill and tap your receiver. 


Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. EGW’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

Add EGW’s Practical or HD Scope Rings to make it a complete overhaul!

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

 

 

Made In The USA

Item Number Price  
46142 $40.00

 

EGW Ruger Revolver Picatinny Scope Mount

 

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided

The bolt pattern on our Ruger Revolver mount will fit the Ruger Blackhawk and Redhawk. 

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights.

 

 

 

Made In The USA

 

Item Number Price  
49000 $30.00

 

EGW Ruger Revolver Picatinny Scope Mount Undrilled

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided

The bolt pattern on our Ruger Revolver mount will fit the Ruger Blackhawk and Redhawk. 

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights

 

 

Made In The USA

 

 

 

 

 

Item Number Price  
49002 $30.00

 

EGW Ruger Revolver Picatinny Scope Mount Silver

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided

The bolt pattern on our Ruger Revolver mount will fit the Ruger Blackhawk and Redhawk. The mount is also available undrilled to accommodate unconventional bolt patterns.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights

Made In The USA

 

 

Item Number Price  
49004 $35.00

 

EGW Ruger Revolver Picatinny Scope Mount Undrilled Silver

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided

The bolt pattern on our Ruger Revolver mount will fit the Ruger Blackhawk and Redhawk.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights.

Made In The USA

 

 

 

Item Number Price  
49006 $45.00

 

EGW HD Ruger American Long Action Scope Mount 0 MOA

 

HD Ruger American Scope Mount
Material: 7075 Aluminum
Finish: Matte Black Hardcoat

Available in 0 and 20 MOA.

Compatible with Picatinny or Weaver scope rings.
Installation: Socket head Torx

 

 

Made In The USA

 

 

 

Item Number Price  
80410 $70.00

 

EGW HD Ruger American Long Action Scope Mount 20 MOA

 

HD Ruger American Scope Mount
Material: 7075 Aluminum
Finish: Matte Black Hardcoat

Available in 0 and 20 MOA.

Compatible with Picatinny or Weaver scope rings.
Installation: Socket head Torx

 

 

Made In The USA

 

 

 

 

Item Number Price  
80412 $70.00
 
EGW HD Ruger American Short Action Scope Mount 0 MOA

 

HD Ruger American Scope Mount
Material: 7075 Aluminum
Finish: Matte Black Hardcoat


Compatible with Picatinny or Weaver scope rings.
Installation: Socket head Torx

 

Made In The USA

 

 

 

 

 

Item Number Price  
80400 $70.00

 

EGW HD Ruger American Short Action Scope Mount 20 MOA

 

HD Ruger American Scope Mount
Material: 7075 Aluminum
Finish: Matte Black Hardcoat


Compatible with Picatinny or Weaver scope rings.
Installation: Socket head Torx

 

 

Made In The USA

 

 

 

 

 

Item Number Price  
80402 $70.00

 

EGW HD Ruger No. 1 Scope Mount

 

HD Ruger No. 1 Scope Mount
Material: 7075 Aluminum
Finish: Matte Black Hardcoat

This scope mount fits the Ruger No. 1 with the "B" and "S" barrel contour.

Compatible with Picatinny or Weaver scope rings.
The scope mount mounts flush on the stock recoil pins in the barrel.

 

 

Made In The USA

 

 

 

 

Item Number Price  
80421 $70.00
 

 

 

Your privacy is important to us. Our Checkout page Your privacy is important to us. Our Checkout page uses the absolute highest level of Internet SSL Security and personal information is NOT sold or traded.

 

 

Can't find what you are looking for???  Contact Us  with the manufacturer, product number, and a detailed description of the product you are looking for. Please be very specific. We offer much more than what is on our site.

Errors including descriptive, photographic, pricing, and/or typographic are subject to correction at any time. Pricing does not include shipping or any applicable taxes. 

  2017, The Country Shed

RESTRICTED ITEMS   Some of the goods on The Country Shed website may be restricted in your delivery area by Federal, State, and/or Local law. The Country Shed  does not, and cannot grant the right or authority to persons to purchase items which may be regulated pursuant to such laws.  You must be 21 years of age to purchase anything from The Country Shed and it is your responsibility to check Federal, State, and/or Local laws to insure legal possession of such items in the delivery area.  Further, pursuant to 18 U.S.C. 922 (D)(1)-(9), you cannot be under a legal disability to purchase certain restricted items.

Scope Mounts, Mounts, Scopes, Compact Scopes, Stocks, Rifle,  Handgun, Pistol, Assualt  Weapons, Foregrips, Folding Stocks, Cleaning Kits, Sight Tools, Lasers, Flashlights, Tactical Gear, Magazines, Shotgun, Tactical Vests, Holsters, Light Rails, Picatinny Rails, SKS, AK-47, MAC-90, AR-15, M16, M1 Garand, M14, M1A, Mini-14, Mini-30, M1 Carbine, Hi-Point, H&K, CETME, FN FAL, Glock, Beretta, SAKO, Tikka, Remington, Winchester, Mossberg, Military Surplus, Jerky Guns, Jerky Spices, Meat Processing Supplies, Advanced Technology, Leapers,  UTG, AmegaRanges, Beretta, UltiMAK, TDI, Command Arms, First Samco, MPI Outdoors, Tapco, Buffer Technologies, Blackhawk, Choate,  MAKO,  Fab Defense, McGowan, Napier, NcStar, Streamlight, Sports Pictures, College Football, NFL, NHL, MLB, CFL, NASCAR, Jersey, Football, Baseball, Hockey, and more!!