The Country Shed 

Scopes, Mounts,& Accessories Tactical Shotgun General Accessories Heated Gloves & Socks SAKO Tikka Beretta
Holsters Rifle Bases

Gun Accessories

Handgun / Pistol

DVD's and CD's

Rifle Stocks High Capacity Magazines Tools Disassembly Manuals Sling Shots
Flashlights & Lasers Shotgun Stocks Survival Gear

NFL & College Flags

Slings & Swivel Sets
Novelty And Gift Items Ammo Can Magnets & Stickers Dutch Ovens & Accessories Special Closeouts

Home Contact Us Ordering Shipping & Policies Links What's New & Hot Gift Ideas Join Email List Special Closeouts

 

Mossberg Bases

EGW, Evolution Gun Works, Leapers, UTG,  Mossberg, 100 ATR, 4X4, 500, 590, 835, 930, 935, 695, Scope Mount, Scope Base, Optics Mounting, Platform, Long Action, LA, Short Action, SA, 0 MOA, 20 MOA, Silver, Black,  HD, Heavy Duty, Shotgun, Bolt Action

UTG PRO Made in USA Mossberg 500® Shotgun Picatinny Rail Mount

Proudly Designed and Made in USA

• The Michigan Difference- Enhanced Precision, Material Strength and Quality Control, Replacing Our Classic MNT-MB500T

• Precision Machined from Aircraft Grade Aluminum with Matte Black Hard Coat Anodize

• 5.5" Overall Length with 13 Picatinny Rail Slots for Dot Sights, Rear Sights, and Flexible Positioning of Magnified Optics for Proper Eye Relief Adjustment

• Low Profile See Thru Design Allows Use of Front Sight Bead

• Contoured Bottom Perfectly Fits Mossberg® Model 500® with Drilled and Tapped Receiver

• Includes Assembly Screws and Tools for Simple and Friendly Installation, No Gunsmith Required

Material: Aluminum
Weight: 1.2 oz
Pieces: 1
No. of Rails: 1
Length: 5.5 inch
Width: 0.36 inch
Height: 0.83 inch

Item Number Price  
MTU029SG $20.00

 

EGW Mossberg MVP 5.56 Picatinny Rail Mount 0 MOA

Machined From: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black Only 
Mounting Hardware: Hex Head Screws and Wrench Provided
Center Spread: 3.02"

This mount comes standard with a bevel on both sides making it ambidextrous.

Made for the 5.56/.223 will NOT fit the 7.62/.308 MVP. 

The center spread is the distance between the two middle holes, center to center, on your receiver. All bases sit at approximately 0.4" high. 

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average.

Also, in many cases, it will not obstruct usage of factory iron sights. EGW"s one piece scope mounts are the obvious choice for hunters and tactical shooters alike. This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings. Add EGW"s Practical or HD Scope Rings to make it a complete overhaul!

We machine these in our shop using one of our USA-made Fadal machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability. The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

Item Number Price  
45600 $40.00

 

EGW Mossberg MVP 5.56 Picatinny Rail Mount 20 MOA

Machined From: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black Only 
Mounting Hardware: Hex Head Screws and Wrench Provided
Center Spread: 3.02"

This mount comes standard with a bevel on both sides making it ambidextrous.

Made for the 5.56/.223 will NOT fit the 7.62/.308 MVP. 

The center spread is the distance between the two middle holes, center to center, on your receiver. All bases sit at approximately 0.4" high. 

The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average.

Also, in many cases, it will not obstruct usage of factory iron sights. EGW"s one piece scope mounts are the obvious choice for hunters and tactical shooters alike. This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings. Add EGW"s Practical or HD Scope Rings to make it a complete overhaul!

We machine these in our shop using one of our USA-made Fadal machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability. The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

Item Number Price  
45602 $40.00

 

EGW Mossberg MVP 7.62 Picatinny Rail Mount 0 MOA

Machined From: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black Only
Mounting Hardware: Hex Head Screws and Wrench Provided
Center Spread: 4.169"

This mount comes standard with a bevel on both sides making it ambidextrous.

Made for the 7.62/.308 MVP will NOT fit the 5.56/.223.

The center spread is the distance between the two middle holes, center to center, on your receiver. All bases sit at approximately 0.4" high.
The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average.

Also, in many cases, it will not obstruct usage of factory iron sights. EGW"s one piece scope mounts are the obvious choice for hunters and tactical shooters alike. This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings. Add EGW"s Practical or HD Scope Rings to make it a complete overhaul!

We machine these in our shop using one of our USA-made Fadal machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability. The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

Item Number Price  
45610 $40.00

 

EGW Mossberg MVP 7.62 Picatinny Rail Mount 20 MOA

Machined From: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black Only 
Mounting Hardware: Hex Head Screws and Wrench Provided
Center Spread: 4.169"

This mount comes standard with a bevel on both sides making it ambidextrous.

Made for the 7.62/.308 MVP will NOT fit the 5.56/.223. 

The center spread is the distance between the two middle holes, center to center, on your receiver. All bases sit at approximately 0.4" high. 
The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average.

Also, in many cases, it will not obstruct usage of factory iron sights. EGW"s one piece scope mounts are the obvious choice for hunters and tactical shooters alike. This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings. Add EGW"s Practical or HD Scope Rings to make it a complete overhaul!

We machine these in our shop using one of our USA-made Fadal machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability. The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite.

Item Number Price  
45612 $40.00

 

EGW HD Mossberg MVP 7.62 Scope Mount 0 MOA

Machined From: Solid 7075 T6 Aircraft Grade Aluminum
Finish: Matte Black Only
Compatible with Picatinny or Weaver scope rings. 
Mounting Hardware: Socket Head Torx® Screws and Wrench Provided
Center Spread: 4.169"
Overall Length of Mount: 6.670"

This mount comes standard with a bevel on both sides making it ambidextrous.

This mount is made specifically for the Mossberg MVP 7.62. Please check your center spread to make sure this rail will fit your application.

*The center spread is the distance between the two middle holes, center to center, on your receiver.

These bases sit at approximately 0.35” high.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The cross slots are also machined the full width of the mount and gauged to MIL-STD 1913 specs maintaining tolerances of +/-.002".

After machining; the mounts are tumbled and sand blasted. The aluminum mounts are Type III hard coat anodized for long lasting durability. The steel rails are Mil Spec parkerized for a durable rust resistant finish. 

Compatible with Picatinny or Weaver scope rings. Add EGW’s HD Scope Rings to make it a complete package! 

From manufacturing to packaging, EGW’s products are made with pride in the USA.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

Item Number Price  
80820 $70.00

 

EGW HD Mossberg MVP 7.62 Scope Mount 20 MOA

Machined From: Solid 7075 T6 Aircraft Grade Aluminum
Finish: Matte Black Only
Compatible with Picatinny or Weaver scope rings. 
Mounting Hardware: Socket Head Torx® Screws and Wrench Provided
Center Spread: 4.169"
Overall Length of Mount: 6.670"

This mount comes standard with a bevel on both sides making it ambidextrous.

This mount is made specifically for the Mossberg MVP 7.62. Please check your center spread to make sure this rail will fit your application.

*The center spread is the distance between the two middle holes, center to center, on your receiver.

These bases sit at approximately 0.35” high.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The cross slots are also machined the full width of the mount and gauged to MIL-STD 1913 specs maintaining tolerances of +/-.002".

After machining; the mounts are tumbled and sand blasted. The aluminum mounts are Type III hard coat anodized for long lasting durability. The steel rails are Mil Spec parkerized for a durable rust resistant finish. 

Compatible with Picatinny or Weaver scope rings. Add EGW’s HD Scope Rings to make it a complete package! 

From manufacturing to packaging, EGW’s products are made with pride in the USA.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

Item Number Price  
80822 $70.00

 

EGW Mossberg 100 ATR Bolt Action, 4x4 Picatinny Rail Mount

Machined From: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black Only
Mounting Hardware: Hex Head Screws and Wrench Provided

Center Spread: 4.71”
Overall Length of Mount: 7.46”

*The center spread is the distance between the two middle holes, center to center, on your receiver.

All bases sit at approximately 0.4” high.

Our Mossberg 100 ATR mount is made for LONG ACTION guns.

This mount will work for the Mossberg 4 x 4.

We do not produce a mount for the Short Action.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. EGW’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike.
This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Add EGW’s Practical or HD Scope Rings to make it a complete overhaul!

We machine these in our shop using one of our USA-made Fadal machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability.

The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

Made In The USA

Item Number Price  
45500 $40.00

 

EGW Mossberg 500, 590 Early (pre '97) Shotgun Picatinny Rail Mount

Machined From: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black Only
Mounting Hardware: Hex Head Screws and Wrench Provided

Mossberg 500 (Pre-’97)
Center Spread: 2.11"
Overall Length of Mount: 5.8"

*The center spread is the distance between the two middle holes, center to center, on your receiver.

All bases sit at approximately 0.4” high.

Our Mossberg 500 Pre-'97 mount comes drilled for and is provided with 6-48 screws. The late model of the mount (post-'97) is drilled for and provided with 8-40 screws.

Custom silver anodizing is available upon request, for an additional charge of $15 (a lead time of approximately 3 months is also associated with this custom anodizing. Please call us if you are interested in placing a custom order).

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. EGW’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike.
This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Add EGW’s Practical or HD Scope Rings to make it a complete overhaul!

We machine these in our shop using one of our USA-made Fadal machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability.

The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

 

Made In The USA

Item Number Price  
45300 $30.00

 

EGW Mossberg 500, 590, 835, 930, 935 Late (after '97) Shotgun Picatinny Rail Mount

Machined From: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black Only
Mounting Hardware: Hex Head Screws and Wrench Provided

Mossberg 500 (Post-’97)
Center Spread: 2.125"
Overall Length of Mount: 5.8"

*The center spread is the distance between the two middle holes, center to center, on your receiver.

All bases sit at approximately 0.4” high.

Our Mossberg 500 Pre-'97 mount comes drilled for and is provided with 6-48 screws. The late model of the mount (post-'97) is drilled for and provided with 8-40 screws.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. EGW’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike.
This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Add EGW’s Practical or HD Scope Rings to make it a complete overhaul!

We machine these in our shop using one of our USA-made Fadal machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability.

The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

Made In The USA

Item Number Price  
45310 $30.00

 

EGW Mossberg 695 Bolt Action Shotgun Picatinny Rail Mount

Machined From: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black Only
Mounting Hardware: Hex Head Screws and Wrench Provided

Action Length
Center Spread: 3.80”
Overall Length of Mount: 6.280”

*The center spread is the distance between the two middle holes, center to center, on your receiver.

This base sits at approximately 0.575” high.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. EGW’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike.
This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Add EGW’s Practical or HD Scope Rings to make it a complete overhaul!

We machine these in our shop using one of our USA-made Fadal machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability.

The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite

Made In The USA

Item Number Price  
45400 $40.00

 

EGW HD Mossberg 500, 590, 835, 930, 935 Late (after '97) Shotgun Picatinny Rail Scope Mount

Machined From: Solid 7075 T6 Aircraft Grade Aluminum
Finish: Matte Black Only
Compatible with Picatinny or Weaver scope rings.
Mounting Hardware: Socket Head Torx® Screws and Wrench Provided

Action: Mossberg 500 (Post-’97)
Center Spread: 2.125”
Overall Length of Mount: 5.880”

 

Made In The USA

 

 

 

 

 

Item Number Price  
80800 $50.00

 

EGW HD Mossberg MVP 5.56 Scope Mount 0 MOA

Machined From: Solid 7075 T6 Aircraft Grade Aluminum
Finish: Matte Black Only
Compatible with Picatinny or Weaver scope rings.
Mounting Hardware: Socket Head Torx

 

Made In The USA

 

 

 

 

 

 

 

 

Item Number Price  
80810 $70.00

 

EGW HD Mossberg MVP 5.56 Scope Mount 20 MOA

Machined From: Solid 7075 T6 Aircraft Grade Aluminum
Finish: Matte Black Only
Compatible with Picatinny or Weaver scope rings.
Mounting Hardware: Socket Head Torx

 

Made In The USA

 

 

 

 

 

 

 

 

Item Number Price  
80812 $70.00
 

 

 

Your privacy is important to us. Our Checkout page Your privacy is important to us. Our Checkout page uses the absolute highest level of Internet SSL Security and personal information is NOT sold or traded.

 

Can't find what you are looking for???  Contact Us  with the manufacturer, product number, and a detailed description of the product you are looking for. Please be very specific. We offer much more than what is on our site.

Errors including descriptive, photographic, pricing, and/or typographic are subject to correction at any time. Pricing does not include shipping or any applicable taxes. 

  2017, The Country Shed

RESTRICTED ITEMS   Some of the goods on The Country Shed website may be restricted in your delivery area by Federal, State, and/or Local law. The Country Shed  does not, and cannot grant the right or authority to persons to purchase items which may be regulated pursuant to such laws.  You must be 21 years of age to purchase anything from The Country Shed and it is your responsibility to check Federal, State, and/or Local laws to insure legal possession of such items in the delivery area.  Further, pursuant to 18 U.S.C. 922 (D)(1)-(9), you cannot be under a legal disability to purchase certain restricted items.

Scope Mounts, Mounts, Scopes, Compact Scopes, Stocks, Rifle,  Handgun, Pistol, Assualt  Weapons, Foregrips, Folding Stocks, Cleaning Kits, Sight Tools, Lasers, Flashlights, Tactical Gear, Magazines, Shotgun, Tactical Vests, Holsters, Light Rails, Picatinny Rails, SKS, AK-47, MAC-90, AR-15, M16, M1 Garand, M14, M1A, Mini-14, Mini-30, M1 Carbine, Hi-Point, H&K, CETME, FN FAL, Glock, Beretta, SAKO, Tikka, Remington, Winchester, Mossberg, Military Surplus, Jerky Guns, Jerky Spices, Meat Processing Supplies, Advanced Technology, Leapers,  UTG, AmegaRanges, Beretta, UltiMAK, TDI, Command Arms, First Samco, MPI Outdoors, Tapco, Buffer Technologies, Blackhawk, Choate,  MAKO,  Fab Defense, McGowan, Napier, NcStar, Streamlight, Sports Pictures, College Football, NFL, NHL, MLB, CFL, NASCAR, Jersey, Football, Baseball, Hockey, and more!!