The Country Shed 

Scopes, Mounts,& Accessories Tactical Shotgun Meat Processing Heated Gloves & Socks SAKO Tikka Beretta
Holsters Rifle Bases

Gun Accessories

Handgun / Pistol

DVD's and CD's

Rifle Stocks High Capacity Magazines Tools Disassembly Manuals Sling Shots
Flashlights & Lasers Shotgun Stocks Survival Gear

NFL & College Flags

General Accessories
Novelty And Gift Items Ammo Can Magnets & Stickers Dutch Ovens & Accessories Special Closeouts Slings & Swivel Sets

Home Contact Us Ordering Shipping & Policies Links What's New & Hot Gift Ideas Join Email List Special Closeouts

 

EGW Scope Rings

EGW Scope Rings, Aluminum Scope Rings, 1 Inch, 30mm, 34mm, Tube, Picatinny, Weaver, Matte Black Finish, Tactical Rings,  Delrin Inserts, 

 

EGW 1 Inch Practical Aluminum Rings .750 Inch

 

EGW Practical Aluminum Rings are machined from aluminum and anodized for a matte black finish.

 

 

Made In The USA

 

 

 

 

 

 

 

Item Number Price  
60000 $60.00

 

EGW 30mm Practical Aluminum Rings .840 Inch

 

EGW Practical Aluminum Rings are machined from aluminum and anodized for a matte black finish.

 

 

Made In The USA

 

 

 

 

 

 

 

Item Number Price  
61000 $60.00

 

EGW HD 30 MM Tactical Aluminum Rings .850 Inch

EGW’s bestselling rings are created in our American-made Fadal by machining aircraft grade aluminum from billet one pair of rings at a time.

We bore the holes to 30mm +.0014”. When we machine the profiles of the ring we build in a .030” radius on all outside edges. Next we machine a 45 degree bevel around the entire ring and clamp. We clamp the pair on a 30mm mandrill with a 1/8” pin to keep the pair exactly together. We then thread form and tap holes in the ring. Thread forming is 40% stronger than cut threads.

The rings are serial engraved before they are separated. One ring and cap has a decimal in front of the numbers so the caps match exactly. i.e. one ring will show “575” and its identical twin will show “.575”.

We then sand blast them for a matte finish and anodize them in Eastern Pennsylvania.

The cross bolt is made from chromoly steel in our turning centers, roll threaded in-house and heat treated and blued locally. The ring nut is beveled on both ends and an inset washer is used to keep the nut from scoring the finish on the clamp. The threads are roll formed for strength, fit (class 2a) and finish. The clamp is machined from billet and complete with radius and bevels, and anodized to the match rings.

Our rings are measured from where the ring sits on the top of the base, to the center of the ring.

Our Tactical rings are available in 3 heights:
.850” high
.990” high
1.275" high.

If your scope has an objective greater than 56mm, we recommended .990” rings or higher.

One set of rings weighs in at approximately 4.8oz.
We recommend that you torque the crossbolts of our HD Rings to 65 inch pounds, and the top screws to 15 inch pounds.
1” Inch machined Delrin Inserts are available and sold separately to accommodate a 1” scope tube.

Made In The USA

Item Number Price  
61100 $125.00

 

EGW HD 30 MM Tactical Aluminum Rings .990 Inch

EGW’s bestselling rings are created in our American-made Fadal by machining aircraft grade aluminum from billet one pair of rings at a time.

We bore the holes to 30mm +.0014”. When we machine the profiles of the ring we build in a .030” radius on all outside edges. Next we machine a 45 degree bevel around the entire ring and clamp. We clamp the pair on a 30mm mandrill with a 1/8” pin to keep the pair exactly together. We then thread form and tap holes in the ring. Thread forming is 40% stronger than cut threads.

The rings are serial engraved before they are separated. One ring and cap has a decimal in front of the numbers so the caps match exactly. i.e. one ring will show “575” and its identical twin will show “.575”.

We then sand blast them for a matte finish and anodize them in Eastern Pennsylvania.

The cross bolt is made from chromoly steel in our turning centers, roll threaded in-house and heat treated and blued locally. The ring nut is beveled on both ends and an inset washer is used to keep the nut from scoring the finish on the clamp. The threads are roll formed for strength, fit (class 2a) and finish. The clamp is machined from billet and complete with radius and bevels, and anodized to the match rings.

Our rings are measured from where the ring sits on the top of the base, to the center of the ring.

Our Tactical rings are available in 3 heights:
.850” high
.990” high
1.275" high

If your scope has an objective greater than 56mm, we recommended .990” rings or higher.

One set of rings weighs in at approximately 4.8oz.
We recommend that you torque the crossbolts of our HD Rings to 65 inch pounds, and the top screws to 15 inch pounds.
1” Inch machined Delrin Inserts are available and sold separately to accommodate a 1” scope tube.

Made In The USA

Item Number Price  
61101 $125.00

 

EGW HD 30 MM Tactical Aluminum Rings 1.275 Inch

EGW’s bestselling rings are created in our American-made Fadal by machining aircraft grade aluminum from billet one pair of rings at a time.

We bore the holes to 30mm +.0014”. When we machine the profiles of the ring we build in a .030” radius on all outside edges. Next we machine a 45 degree bevel around the entire ring and clamp. We clamp the pair on a 30mm mandrill with a 1/8” pin to keep the pair exactly together. We then thread form and tap holes in the ring. Thread forming is 40% stronger than cut threads.

The rings are serial engraved before they are separated. One ring and cap has a decimal in front of the numbers so the caps match exactly. i.e. one ring will show “575” and its identical twin will show “.575”.

We then sand blast them for a matte finish and anodize them in Eastern Pennsylvania.

The cross bolt is made from chromoly steel in our turning centers, roll threaded in-house and heat treated and blued locally. The ring nut is beveled on both ends and an inset washer is used to keep the nut from scoring the finish on the clamp. The threads are roll formed for strength, fit (class 2a) and finish. The clamp is machined from billet and complete with radius and bevels, and anodized to the match rings.

Our rings are measured from where the ring sits on the top of the base, to the center of the ring.

Our Tactical rings are available in 3 heights:
.850” high
.990” high
1.275" high.

If your scope has an objective greater than 56mm, we recommended .990” rings or higher.

One set of rings weighs in at approximately 4.8oz.
We recommend that you torque the crossbolts of our HD Rings to 65 inch pounds, and the top screws to 15 inch pounds.
1” Inch machined Delrin Inserts are available and sold separately to accommodate a 1” scope tube.

Made In The USA

Item Number Price  
61102 $125.00

 

EGW HD 34MM Tactical Rings OPS2

 

34mm 1.125” optical center line.
Matched sets / 7075T6
Mil spec 8625 type III hardcoat
8-32 holes in the rear are for optional anti-cant module
These are PSR optic

 

 

Made In The USA

 

 

 

 

 

Item Number Price  
61103 $175.00 Out Of Stock

 

EGW Ring Inserts 1 Inch Delrin Inserts For a 30mm Rings

 

This set of inserts was designed to be used with our HD Tactical rings for customers that would like to use EGW's 30mm rings with a 1”  scope.

The inserts are double rimmed to ensure that no slip takes place. We have done testing in our facility and have never had any movement of a 1” or 26mm scope when used with our rings and these specially designed inserts.

Made from Delrin. Black in color.

2 per package (4 pieces total).

 

 

Made In The USA

 

 

 

Item Number Price  
60106 $15.00

 

EGW Ring Inserts 26mm Delrin Inserts For 30mm Rings

 

This set of inserts was designed to be used with our HD Tactical rings for customers that would like to use our 30mm rings with a 1” or 26mm scope.

The inserts are double rimmed to ensure that no slip takes place. We have done testing in our facility and have never had any movement of a 1” or 26mm scope when used with our rings and these specially designed inserts.

Made from Delrin. Black in color.

2 per package (4 pieces total).

 

 

Made In The USA

 

 

 

Item Number Price  
60107 $15.00
 
EGW Crossbolt and Nut

 

For use on EGW Tactical Rings and Extendarisers. Sold as a set. Set contains: 1 EGW Crossbolt 1 EGW Nut 1 Red Washer To be torqued to 60 INCH/LBS.

 

Made In The USA

 

 

 

 

 

 

 

Item Number Price  
90100 $8.00
 

 

Your privacy is important to us. Our Checkout page Your privacy is important to us. Our Checkout page uses the absolute highest level of Internet SSL Security and personal information is NOT sold or traded.

 

 

Can't find what you are looking for???  Contact Us  with the manufacturer, product number, and a detailed description of the product you are looking for. Please be very specific. We offer much more than what is on our site.

Errors including descriptive, photographic, pricing, and/or typographic are subject to correction at any time. Pricing does not include shipping or any applicable taxes. 

  2017, The Country Shed

RESTRICTED ITEMS   Some of the goods on The Country Shed website may be restricted in your delivery area by Federal, State, and/or Local law. The Country Shed  does not, and cannot grant the right or authority to persons to purchase items which may be regulated pursuant to such laws.  You must be 21 years of age to purchase anything from The Country Shed and it is your responsibility to check Federal, State, and/or Local laws to insure legal possession of such items in the delivery area.  Further, pursuant to 18 U.S.C. 922 (D)(1)-(9), you cannot be under a legal disability to purchase certain restricted items.

Scope Mounts, Mounts, Scopes, Compact Scopes, Stocks, Rifle,  Handgun, Pistol, Assualt  Weapons, Foregrips, Folding Stocks, Cleaning Kits, Sight Tools, Lasers, Flashlights, Tactical Gear, Magazines, Shotgun, Tactical Vests, Holsters, Light Rails, Picatinny Rails, SKS, AK-47, MAC-90, AR-15, M16, M1 Garand, M14, M1A, Mini-14, Mini-30, M1 Carbine, Hi-Point, H&K, CETME, FN FAL, Glock, Beretta, SAKO, Tikka, Remington, Winchester, Mossberg, Military Surplus, Jerky Guns, Jerky Spices, Meat Processing Supplies, Advanced Technology, Leapers,  UTG, AmegaRanges, Beretta, UltiMAK, TDI, Command Arms, First Samco, MPI Outdoors, Tapco, Buffer Technologies, Blackhawk, Choate,  MAKO,  Fab Defense, McGowan, Napier, NcStar, Streamlight, Sports Pictures, College Football, NFL, NHL, MLB, CFL, NASCAR, Jersey, Football, Baseball, Hockey, and more!!