The Country Shed 

Mounts and Scopes Tactical Shotgun Meat Processing Heated Gloves & Socks SAKO Tikka Beretta
Holsters Rifle Bases

Gun Accessories

Handgun / Pistol

DVD's and CD's

Rifle Stocks High Capacity Magazines Tools Disassembly Manuals Sling Shots
Flashlights & Lasers Shotgun Stocks Survival Gear

Special Closeouts

General Accessories
Novelty And Gift Items

Ammo Can Magnets & Stickers

NFL & College Flags

Slings & Swivel Sets

Home Contact Us Ordering Shipping & Policies Links What's New & Hot Gift Ideas Join Email List Special Closeouts

 

Buffer Technologies Pistol Recoil Buffers

Buffer Technologies Pistol Recoil Buffers to reduce recoil and help protect your weapon from metal to metal recoil contact during firing for the Beretta, 1911A1, CZ-75, CZ-85, Glock, MAC-11, MAC-10, SIG 2020, SIG 226, Smith & Wesson 41, Smith & Wesson Centerfire, and more!!!

Buffer Technologies Beretta 92/96 Recoil Buffer

Our buffer for the Beretta 92/96 is a departure from our original line of buffers. It was not possible to place a cushioning buffer between the slide and frame, as with our other recoil buffers, without making our own guide rod.

This new design includes a stainless steel guide rod with a slide bushing and, of course, a recoil buffer.  The guide rod and slide bushing are made from a high carbon stainless steel which has a hardness of 48-52 Rockwell.

During our testing, we fired in excess of 1,000 rounds through a Langdon Tactical Technologies 92 Vertec. Not a single malfunction was experienced! By installing the new guide rod and buffer you too will reduce felt recoil, enhance muzzle control, and lengthen service life.  The guide rod and buffer will fit both the 92 and 96 series of Beretta handguns.

 Installation is a simple:  slide the bushing into the guide rod hole in the slide and swap your old guide rod for our new one, complete with buffer. When you pull the slide to the rear, the slide contacts the buffer before it impacts the frame.

Note: This buffer will only work in the full size variants of the Models 92 and 96. Also works in Taurus 92/96.

Item Number Price  
BER1 $24.50

 

Buffer Tech Browning Hi-Power Recoil Buffer

 The Browning Hi-Power Recoil Buffer ™ easily fits onto the recoil spring guide rod. Installation takes less than a minute and can be done without any special tools.

 

 

 

 

 

 

 

 

Item Number Price  
BH1 $10.00

 

Buffer Technologies Colt 1911A1 and Clones Recoil Buffer

Gunsmiths around the world have long recommended that recoil buffers be used in the 1911. And why not? They reduce muzzle jump, they reduce felt recoil and they extend the pistol's service life as well!

Installation is a breeze and requires no tools. In a couple of minutes you'll be ready to head for the range and you'll have no trouble feeling the difference the first time you shoot with it! 

With all the custom parts available for the 1911 and its many clones, you can very quickly invest many hundreds of dollars into it. But when the actions starts to loosen, all those custom parts become just so many pieces. So why not give your pistol the highest degree of protection available, the Buffer Technologies 1911 Recoil Buffer™!

Item Number Price  
45A $9.50

 

Buffer Technologies CZ-75, 85 Recoil Buffer

The CZ recoil buffer will eliminate the metal to metal impact of the slide on the receiver each time the weapon is fired.  You will extend the service life of your pistol as well as have reduced felt recoil by installing one in your weapon. Installation is easy and requires no special tools or modification to your gun.

Item Number Price  
CZ1 $9.50

 

Buffer Technologies Glock Recoil Buffer 

The Buffer Technologies Recoil Buffer for the Glock pistol eliminates the metal slide from impacting the polymer frame. This repeated impact batters the frame where the two parts come into contact. Stopping this battering is accomplished by inserting the buffer between the recoil spring and the slide. Each time the action is worked or the weapon is fired the buffer comes into contact with the frame, not the metal slide. Installation of the Glock Buffer will result in reduced felt recoil, enhanced muzzle control and a longer service life. The Glock Recoil Buffer will fit models 17, 17L, 18, 19, 20, 21, 22, 23, 24, 24C, 31, 32, and 37. It will NOT fit Gen 4 Glocks.

Item Number Price  
GK1 $9.50

 

Buffer Technologies MAC-11 Recoil Buffer

The Buffer Technologies Recoil Buffer™ for the Mac 10 and 11 replaces the original factory unit. It differs from the original one in two very beneficial ways. First, it is made of a resilient, high-impact polyurethane. This material is capable of enduring the normal firing conditions that the factory unit couldn't stand up to. Second, it allows the recoil spring to rest against the rear support plate. This eliminates the severe compression between the bolt and the rear support plate so that the recoil spring, which had a tendency to chew up the buffer, no longer proves self destructive to the weapon. The Recoil Buffers™ will work with any caliber but the model must be specified with your order (Mac 10 or Mac 11).

Those who install Recoil Buffers™ into their Mac's will not only be protecting their investment by prolonging the weapons' service life, but they will also find that the recoil is reduced and muzzle stability is increased which is very important for rapid fire. In fact, Recoil Buffers™ can do this for any gun! They work so well that many people believe they should be installed in all guns by their manufacturers. Unfortunately, this is not yet the case. So, until that time comes, make sure your weapon functions as well and as long as it possibly can.

Item Number Price  
M11 $7.00

 

Buffer Technologies  MAC-10 Recoil Buffer

The Buffer Technologies Recoil Buffer™ for the Mac 10 and 11 replaces the original factory unit. It differs from the original one in two very beneficial ways. First, it is made of a resilient, high-impact polyurethane. This material is capable of enduring the normal firing conditions that the factory unit couldn't stand up to. Second, it allows the recoil spring to rest against the rear support plate. This eliminates the severe compression between the bolt and the rear support plate so that the recoil spring, which had a tendency to chew up the buffer, no longer proves self destructive to the weapon. The Recoil Buffers™ will work with any caliber but the model must be specified with your order (Mac 10 or Mac 11).

Those who install Recoil Buffers™ into their Mac's will not only be protecting their investment by prolonging the weapons' service life, but they will also find that the recoil is reduced and muzzle stability is increased which is very important for rapid fire. In fact, Recoil Buffers™ can do this for any gun! They work so well that many people believe they should be installed in all guns by their manufacturers. Unfortunately, this is not yet the case. So, until that time comes, make sure your weapon functions as well and as long as it possibly can!

Item Number Price  
M10 $6.50

 

Buffer Technologies SIG®, 220/226 Recoil Buffer

The Long-Awaited SIG 220/226 Recoil Buffer Is Here!

Our R&D department has created an recoil buffer that functions in this esteemed side arm.

This buffer is a departure from our original line of buffers. Like the Beretta 92/96 buffer we released recently, it was not possible to place a cushioning buffer between the slide and frame like with our other recoil buffers, without making our own guide rod.

This new design includes a stainless steel guide rod with a slide bushing and, of course, a recoil buffer.  The guide rod and slide bushing are made from a high carbon stainless steel which has a hardness of 48-52 Rockwell.

 

By installing the new guide rod and buffer you too will reduce felt recoil, enhance muzzle control, and lengthen service life.  The guide rod and buffer will fit both the 220 and 226 models.

Installation is a simple:  slide the bushing into the guide rod hole in the slide and swap your old guide rod for our new one, complete with buffer. When you pull the slide to the rear, the slide contacts the buffer before it impacts the frame.

Item Number Price  
SIG1 $24.50

 

Buffer Tech SIG 229 Stainless Steel Guide Rod and Recoil Buffer

 

 
SIG 229 Stainless Steel Guide Rod and Recoil Buffer ™. The buffer for the SIG 229 is a departure from our original line of buffers. It was designed on our own guide rod since it was not possible to place a cushioning buffer between the slide and frame without this addition.

 

 

 

Item Number Price  
SIG9 $25.00

 

Buffer Technologies Smith & Wesson 41 Recoil Buffer

The Smith and Wesson Model 41 buffer will eliminate the shock experienced when the pistol is fired and the slide moves to the rear and impacts the receiver.  This shock is what causes movement in your sights when firing.  Once you install the recoil buffer in your gun you will experience less sight movement and felt recoil.  Installation is easy and requires nothing more than removal of the barrel from the frame.  No modification to the pistol is required.

Item Number Price  
41SW $9.50

 

 

 

 

Your privacy is important to us. Our Checkout page Your privacy is important to us. Our Checkout page uses the absolute highest level of Internet SSL Security and personal information is NOT sold or traded.

 

 

Can't find what you are looking for???  Contact Us  with the manufacturer, product number, and a detailed description of the product you are looking for. Please be very specific. We offer much more than what is on our site.

Errors including descriptive, photographic, pricing, and/or typographic are subject to correction at any time. Pricing does not include shipping or any applicable taxes. 

  2017, The Country Shed

RESTRICTED ITEMS   Some of the goods on The Country Shed website may be restricted in your delivery area by Federal, State, and/or Local law. The Country Shed  does not, and cannot grant the right or authority to persons to purchase items which may be regulated pursuant to such laws.  You must be 21 years of age to purchase anything from The Country Shed and it is your responsibility to check Federal, State, and/or Local laws to insure legal possession of such items in the delivery area.  Further, pursuant to 18 U.S.C. 922 (D)(1)-(9), you cannot be under a legal disability to purchase certain restricted items.

Scope Mounts, Mounts, Scopes, Compact Scopes, Stocks, Rifle,  Handgun, Pistol, Assualt  Weapons, Foregrips, Folding Stocks, Cleaning Kits, Sight Tools, Lasers, Flashlights, Tactical Gear, Magazines, Shotgun, Tactical Vests, Holsters, Light Rails, Picatinny Rails, SKS, AK-47, MAC-90, AR-15, M16, M1 Garand, M14, M1A, Mini-14, Mini-30, M1 Carbine, Hi-Point, H&K, CETME, FN FAL, Glock, Beretta, SAKO, Tikka, Remington, Winchester, Mossberg, Military Surplus, Jerky Guns, Jerky Spices, Meat Processing Supplies, Advanced Technology, Leapers,  UTG, AmegaRanges, Beretta, UltiMAK, TDI, Command Arms, First Samco, MPI Outdoors, Tapco, Buffer Technologies, Blackhawk, Choate,  MAKO,  Fab Defense, McGowan, Napier, NcStar, Streamlight, Sports Pictures, College Football, NFL, NHL, MLB, CFL, NASCAR, Jersey, Football, Baseball, Hockey, and more!!